code 1336 help
11-02-2010, 06:56 PM
#2
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Crankshaft Position (CKP) System Variation Not Learned
Is this what needs to be done and can this be why my car stalls out now. I just took the car to the track and ran 11.28 but the car stalled a few times. When i checked the codes i got a p1336. Also my plugs looked pretty rich now.
I have a new engine noise after the track so i hope i didnt screwit up because of this
Is this what needs to be done and can this be why my car stalls out now. I just took the car to the track and ran 11.28 but the car stalled a few times. When i checked the codes i got a p1336. Also my plugs looked pretty rich now.
I have a new engine noise after the track so i hope i didnt screwit up because of this
11-06-2010, 10:34 AM
#5
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
that code has nothing to do with how the car runs. have someone with a tech 2 do a ckp re-learn or just turn the code off in your tune,, it is just for misfire monitoring anyway.
11-06-2010, 12:36 PM
#6
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
So i can drive the car or run it hard with no problems then. I thought i seen something that said it had to do with timming and could mess the engine up if drove like this
