10 Second Club - 10.28 @ 133 in a 6spd

Figured I post up my results from last nights outing. Only got 3 pass but I was happy with all three. 1st past I started off with a 10.419 @ 132.80, 1.50 60ft. 2nd pass was a 10.411 @ 132.92, 1.44 60ft. I short shifted the 2-3 & 3-4 shifts. The final pass was a 10.286 @ 133.46, 1.42 60ft.

My set is as follows: LS1 347, 11.2:1 compression, PRC stage 2.5 5.3L heads, custom 23x cam, ported FAST 92, HSW 92mm SI plate jetted for a 150 shot, Tick level 2 T56, Mcleod RXT twin, Tick master cyl, PST 3.5in aluminum drive shaft, and a Moser 9 inch with 3.89's and a locker. For suspenion, QA1 SA rear shocks, Spohn rear drag sway bar, BMR LCA, and a BMR torque arm w/ relocation bracket. Front suspenion is all stock minus the front sway bar. Right now the car is still full weight with all the functioning factory options (ABS/TCS, AC, 12 disc cd changer, pwr windows and door locks, etc) The car weights about 3700lbs with my fast ass in it haha :D

Hoping to up the shot an remove more weight and crack 9's with a 6spd :devil:

Heres the Slip
http://img.photobucket.com/albums/v647/REW838/2010-11-02220428.jpg
Video of the 10.28 pass
http://i222.photobucket.com/albums/dd186/98tadriv/th_rob1028at133.jpg (http://s222.photobucket.com/albums/dd186/98tadriv/?action=view&current=rob1028at133.mp4)

Awesome good times with a 6spd...get some weight out of that thing. Looks like you went to Atco,take it to Cecil on a Saturday test and tune. You will get a bunch of pass's. I got 7 runs 2 weeks ago and could have got more.

Awesome good times with a 6spd...get some weight out of that thing. Looks like you went to Atco,take it to Cecil on a Saturday test and tune. You will get a bunch of pass's. I got 7 runs 2 weeks ago and could have got more.

It was good old Atco haha. Would have gotten more passes but there were 2 oil downs which brought everthing to a stand still. :bang:

nice runs, any dyno numbers on the shot?

nice runs, any dyno numbers on the shot?

As of right now, no dyno #s. The car has been tuned on the track but if I had to guess, I'd say 580-620 range.

what was da tues night at atco. -1500?

Badass. EDIT i read your First post and found my ansewer, what shocks front and rear do you use? I need to get some spray:(

Nice times! Did i miss it, or what clutch were you using? What rpm are you launching at?

what was da tues night at atco. -1500?
Im not sure but I believe the da got close to -1800

Nice times! Did i miss it, or what clutch were you using? What rpm are you launching at?

Sorry about that, I'm running the Mcleod RXT twin. That pass I left at 5500.

Congratulations on the new best....

Low 10's in a street car with a 6-speed/spray is gettin it done :D

Those are some great times and some good 60' numbers. What holes are you useing on your T/A relocation bracket if you dont mind me asking?

Im using the 2nd from the bottom holes. I believe thats the factory location.

Im not sure but I believe the da got close to -1800



Sorry about that, I'm running the Mcleod RXT twin. That pass I left at 5500.


-1800 i new i shouldve gone down . btw congrats on the 10.28. going to black friday t/t nov 26?

Its all bc i sold you that clutch and tuned it haha

Its all bc i sold you that clutch and tuned it haha

I thank you for the clutch, I appreciate it! Actually Tommy M. tuned the car at the last track rental I went to at Atco. He built the motor and tuned my current set up. But you guys have been very helpful to me over years!:nod:

Way to go Rob your driving has really made this well put together set up shine.

May be we should hit the rollers to see what it puts down but with results like this its almost pointless the Track numbers don't lie. ;)

All that track testing and Tuning we did is paying off who know may be by the end of the year we'll squeeze out some single digits with a car in full street form looks and sounds mostly stock. SLEEPER!!!

the da got close to -1800

MUST BE NICE!

good times with a 6 speed.

I thank you for the clutch, I appreciate it! Actually Tommy M. tuned the car at the last track rental I went to at Atco. He built the motor and tuned my current set up. But you guys have been very helpful to me over years!:nod:

thats a hell of a pass rob...congrats to u and tommy for the great set up!

I want to try to get my 99 chicken in the 10,s with a hand shaker so watching what you guys results are. Want to do it without spray but do not know if it is doable with stock inch motor.

were you spraying off the line?