View Full Version : 402, 418, & 427 Rotating Assemblies @ Texas Speed - CHEAP!


Jon@Texas-Speed
11-09-2010, 04:49 PM
Hey guys, we have a couple rotating assemblies that didn't get picked up by customers so we are moving them out cheap! We only have one of each of the rotating assemblies below. They are fully balanced with bearings! Options and pricing are listed below!

402 Rotating Assembly

Eagle 4" Stroke Crankshaft (24X Reluctor)
Eagle 6.125" H-beam Rods w/ 2000 Rod Bolts
Wiseco K464X05 Pistons (4.005" Bore, 4.000" Stroke, 6.125" Rod Length, -3cc Flat-Top, 1.115" CH, Wrist Pins & Steel Top/Napier 2nd Ring Set Included)
Clevite H-series Rod and Main Bearings


Price: SOLD!

418 Rotating Assembly

Eagle 4" Stroke Crankshaft w/ ESP Armour Coating
Eagle 6.125" H-beam Rods w/ ARP 2000 Rod Bolts
TSP Exclusive Wiseco Piston Set (4.080" Bore, 4.000" Stroke, 6.125" Rod Length, -10cc Dish; Includes Wrist Pins and GFX Steel Top/Napier 2nd Ring Set)
Clevite H-series Rod and Main Bearings

Price: SOLD!

427 Rotating Assembly

Eagle 4" Stroke Crankshaft w/ ESP Armour Coating
Eagle 6.125" H-beam Rods w/ ARP 2000 Rod Bolts
Wiseco K397F125 Pistons: Wiseco Forged Piston Set: 4.125" Bore x 4.0" Stroke x 6.125" Rod, 1.115" CD, -32cc Dish; Includes Wrist Pins and Steel Top Ring Set)
Clevite H-series Rod and Main Bearings


Price: $1850 + SHIPPING!

Again, these are the only rotating assemblies we have at this pricing. We can not mix or match parts as they are already balanced and ready to go! Give us a call with any questions you have and we'll be sure to get you fixed up!

Thanks!
Texas Speed & Performance

Jon@Texas-Speed
11-10-2010, 09:59 AM
402 Rotating Assembly is gone!

Pony Exp.305
11-11-2010, 03:56 AM
Wish I win the lottery, buy one 427...Good deal..

Jon@Texas-Speed
11-17-2010, 01:20 PM
Ahhh come on man. Go to the bank and take out a loan! haha... JK don't do that! :D

TTT guys! 418 and 427 are still available!

jks67ss396
11-17-2010, 01:57 PM
any 408 assemblies? 9-9.5CR for boost... PM me if you have any

Jon@Texas-Speed
11-18-2010, 09:35 AM
I don't have any at this price. However, we have pretty good pricing on all our rotating assemblies. We can definitely get one put together for you. What heads and stuff are you looking at running and I will see what pistons will work for your application.

Jon

jks67ss396
11-18-2010, 09:38 AM
317 heads... 72cc's? for 15 psi... 9:1? might go higher boost, but would expect to use race gas...

thanks

black06g85
11-18-2010, 10:43 AM
damnit I'm going to be broke until after christmas

Sales2@Texas-speed
11-18-2010, 11:04 AM
317 heads... 72cc's? for 15 psi... 9:1? might go higher boost, but would expect to use race gas...

thanks

Wiseco's -20cc Dish piston, with that 72cc chamber and the GM MLS gasket would net you right about 9.1:1 static compression! Those Wiseco's have a very thick top ring land, coated skirts, and come with a steel top/napier 2nd ring set standard! They should work very well for your boost combo!

jks67ss396
11-18-2010, 12:23 PM
can you pm me a price with those pistons and a callies compstar 4" crank and 6.125 rods?

possibly same thing but with scat or eagle crank/rods too.

again, 1000 hp capable. id think even the eagle crank would handle that, right?

Sales2@Texas-speed
11-19-2010, 09:37 AM
PM headed your way!

Sales4@Texas-Speed
11-22-2010, 10:43 AM
418 Rotating Assembly Sold! Only the 427 left, somebody needs to pick this thing up!