What year harness & computer to run DBC on LQ4?
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Brownsville, TX
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
What year harness & computer to run DBC on LQ4?
I'm right now in the process of buying a harness and computer for my 6.0 swap but I want to know what year harness (truck/car) and computer do I have to get to run DBC. Any help is appreciated.
#6
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Brownsville, TX
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
I'm using a 4L80e that originally came from a truck, but I'm planning on getting it rebuilt with a manual valve body so I don't know if the part of the harness that connects to the transmission will have any effect.
#7
Banned
iTrader: (1)
The truck harness run a PRNDL switch on the side of the trans. The Body doesn't, so stay with the truck harness.
Trending Topics
#8
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Brownsville, TX
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Go with the Truck setup then. The PCM is the same sevice number as a car. The Calibration operating system may have the same number, but it is probably the second OSID. The second one is more common to the trucks.
The truck harness run a PRNDL switch on the side of the trans. The Body doesn't, so stay with the truck harness.
The truck harness run a PRNDL switch on the side of the trans. The Body doesn't, so stay with the truck harness.