10 Second Club - h/c/i stock bottom 346 m6 in the 10s

first time trying the 100 shot on the track and got into the 10s. got some things to work on and should be able to get her down alittle further yet. ran out of gear before crossing.

The car is a 2002 z28 SOM M6. Has 42k original miles. im running stock bottom 346 with katech rod bolts, afr205s milled to 58cc, FAST 102 intake with Nick williams 102 throttle body, Fast toys 104mm air lid, cam is custom spec'd by PatG 239/243 .624/.624" 113 +3, Kooks 1 3/4" headers, Kooks off road Y with a single 3" cutout, under drive pulley, Monster level 3 clutch, 6speed built by D&D and upgraded with viper main shaft, Moser 12 bolt with 4.10 gears. The shot is a NX single nozzle kit.

http://i55.tinypic.com/2nqbewm.jpg

http://i52.tinypic.com/2u7wojo.jpg

Very good job that car looks like it hauls the mail for sure and looks tits

Why so low on lift? Slot on the table there. 4.10s should be about perfect. I don't know your da but that should be 10s on motor

Why so low on lift? Slot on the table there. 4.10s should be about perfect. I don't know your da but that should be 10s on motor

I agree with intercooler..

great time nice car

Very nice. Congrats!

Nice! car has a killer stance.

Why so low on lift? Slot on the table there. 4.10s should be about perfect. I don't know your da but that should be 10s on motor

just looking at some old posts noticed i was am way off on my lift lol. Thanks for say something. Its .624" .624"

Nice setup, whats it do on motor alone?

Can't see what your car ran the pics won't come up but you should be able to hit 10's on the motor. I did with trick flow heads and a smaller cam with a stalled auto. 10.90@123mph.. Welcome to the club BTW..

6 speeds are a little harder to make ET. But that 1.5 60' is not bad at all.

Nice times, car looks nice!

sweet :)

10's is my goal, but I won't be trying until a rearend goes in .... still looking, but I am considering new now.

11.16 is best on motor so far. 10's are what im hunting for n/a on the stock bottom end, hoping she'll see that this spring

very nice! that is almost the same exact cam size i have in my 347 :D

Nice!