Dyno Guesses & Bench Racing Forum - Stockton CA Ls1 vs LT1...help help help

well everyone i have a ls1 m6 camaro with a raptor cam. my car puts down 402 rwhp and 377 rwtq and runs a best so far a 12.4 @ 118 in the quarter. My car has stock gears and my sixty isnt to good either. SOOOO my question is what will it take for a LT1 to beat me. My friends LT1 currently runs a 13.5 @ 105, its a m6 with LT's, no cats, and an intake.

We've raced before and of course I blow his doors off. So let me know what would be the recipe but beat my ultimate godly LS1. thanks guys

i think 403rwhp and 378 twtq would do it.

a 150 shot from a wet kit would make it rather interesting.

Eddie, once he gets serious with a cam, heads and N20 he'll leave you in the dust. You go much past what you have and that soft aluminum LS1 block will grenade. :D

drag radials and a 100 shot should do it or be damn close

shit. i don't know. he said hes got a head and cam package coming in but not telling me exactly what the specs are. But i still doubt that he'll beat me with a head and cam package. close maybe but without nitrous to top it off i dont think so. ill also be getting a retune for my nitrous as well just in case.

http://www.youtube.com/watch?v=o7ckrmtYfKc

H/C with full boltons should make it close.

that race looks really close what ever it is

oh yea this race is my camaro cam with bolt ons vs my friends procharged a4 ls1 z28. im the camera car. i did pretty good considering the money i spent

You ever drive over to the east bay to do some runs? But he will need cam, heads, & a lil shot of spray. Without spray he need some good gears, tires, & driver mod

A nice Heads & Cam package from A.I. should do the trick. ;)

My old '93 put down 402whp on a dynojet with A.I.'s 185cc LT1 heads and GM "847" cam, full bolt-ons through a T56.

dam thats not bad for the lt1 ^^^^. as far as the bay goes the furthest i ever went was for the occasional modesto vs stockto, tracy vs stockton, and every now and then sacramento but thats about it. YOu bay area guys are to fast for me lol.

A well setup AI 200cc cnc'd LT1 heads and custom cam should do the trick for him. Or a cam and some go-go juice

A nice Heads & Cam package from A.I. should do the trick. ;) My old '93 put down 402whp on a dynojet with A.I.'s 185cc LT1 heads and GM "847" cam, full bolt-ons through a T56.

A well setup AI 200cc cnc'd LT1 heads and custom cam should do the trick for him. Or a cam and some go-go juice

:suspiciou







:jest:

dam thats not bad for the lt1 ^^^^. as far as the bay goes the furthest i ever went was for the occasional modesto vs stockto, tracy vs stockton, and every now and then sacramento but thats about it. YOu bay area guys are to fast for me lol.

Yea we are :engarde: lol

He'll need good heads and cam to make it good. A small shot and it'll be an easy win for him