Generation IV External Engine - Who sells combo lid, maf and bellows for my fast 102

who can sell me a lid , maf and bellows that all maches togheter to fit my camaro ss 2002 with a fast 102 intake and 102 bigmouth tb on my 402, would like to buy all from one place, the maf does not have to be that big, the intake is already over size for my combo but should not hurt performance, so i am not worried about the bottle neck effect, might even consider a bellows that i could put on my 102 tb and go to my 85mm maf and slp lid.

ws6 store

TSP now has a blade-type 100mm MAF, FYI.. :)

Here we go again...the FAST 102 is not oversized for your combo, its not even oversized for a stock motor. My friend (Sommer86) is building a LQ9 402. Tony Mamo at AFR is specing the whole topend including intake. So far his intake is a ported 102 intake, 102 TB, 100mm MAF and he will most likely be running a 104mm Lid. I would run the 102 on a stock internal LS1 all day over an LS6 to be honest.

^ What prompted that response?? :confused: He was just asking for the ducting or where to find a combo deal for it..

^ What prompted that response?? :confused: He was just asking for the ducting or where to find a combo deal for it..

the intake is already over size for my combo but should not hurt performance, so i am not worried about the bottle neck effect, might even consider a bellows that i could put on my 102 tb and go to my 85mm maf and slp lid.

A 78mm lid going to an 85mm MAF to a 102mm TB will be a huge bottle neck. Im just trying to let him know that doing this will be holding back 20rwhp easily.