racerrit

iTrader: (13)

So seriously i get no feedback nobody out there ever had issues with adjustable rockers on ls1 moving to much side to side? Just wondering if it will cause problem when i fire this thing up. Thanks Ross

Darkman

iTrader: (2)

You might get more feedback if you identify the rockers you are using and indicate which lifter or how much preload you are trying to achieve.

Fastdriver1992

iTrader: (1)

i have adjustable ones in mine. i ran all last season with them on and had no problems

racerrit

iTrader: (13)

Dont see how brand matters but they are pwr some generic i guess they are on studs n guide plates just like old school small block i just dont like the side to side at zerolash. So u just ordered harland sharp like i should have in first place since they have every 2 rockers connected with a shaft it eliminates the side to side motion.

Darkman

iTrader: (2)

My question about brand went to whether they were shaft mounted or not. Side to side play is acceptable on some rockers, by design, and unacceptable on others, also by design. Good luck with the Harland Sharps.