WTB: Z06 Camshaft
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: tulsa oklahoma
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Z06 Camshaft
I am building a Turbo 5.3l on a pretty tight budget and am looking for a good cheap cam. I would like a 2001 Z06 cam, but would also be interested in the 2002-2004. I have seen them around $100 before but was not in the market at the time.
I would also be interested in a used aftermarket cam if the specs/price is right.
If you have a cam that you think might work for me and are willing to get rid of it for a reasonable price then please post up.
Thanks a lot!
Nick
I would also be interested in a used aftermarket cam if the specs/price is right.
If you have a cam that you think might work for me and are willing to get rid of it for a reasonable price then please post up.
Thanks a lot!
Nick
#6
Launching!
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: tulsa oklahoma
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Thank you so much guys for your responses.
Those are some killer deals on the LS2 cams, but I think those dont work on a 5.3 unless I buy the LS2 timing set and timing cover. Which would be more money, I will check on some prices though because it may be pretty inexpensive. Those cams are pretty much 01 Z06 cams arent they?
Dino, Thanks for the offer, that is extremely cheap, but I dont think that cam is quite enough for what i'm wanting.
Spordee1, I may be interested, PM Sent.
Thanks again guys!
And If anyone else has a cam laying around post up please!
Those are some killer deals on the LS2 cams, but I think those dont work on a 5.3 unless I buy the LS2 timing set and timing cover. Which would be more money, I will check on some prices though because it may be pretty inexpensive. Those cams are pretty much 01 Z06 cams arent they?
Dino, Thanks for the offer, that is extremely cheap, but I dont think that cam is quite enough for what i'm wanting.
Spordee1, I may be interested, PM Sent.
Thanks again guys!
And If anyone else has a cam laying around post up please!
Trending Topics
#8
Launching!
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: tulsa oklahoma
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
LS2 Cam - I would be interested but according to Lingenfelter I will need an LS2 4x camshaft sprocket and:
"a 2005 LS2 front cover, 2005 1x cam sprocket, camshaft extension harness, 2005 LS2 chain dampner"
That will be more money than the different in price to get a LS6 cam.
Thanks though!
"a 2005 LS2 front cover, 2005 1x cam sprocket, camshaft extension harness, 2005 LS2 chain dampner"
That will be more money than the different in price to get a LS6 cam.
Thanks though!