Cam recomendation
01-03-2011, 09:08 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2007
Location: Hereford, TX
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Cam recomendation Hey whats up guys been along time since i posted anything. I got an 02 M6 TA, stock right now but im guna be running LS6 Stock heads, Long tubes 4.10s and i would like to kno what cam to run with that combination or maybe a custom grind cam? daily driver. street racing sometimes and somtimes the track when its open. Thanks
01-03-2011, 09:28 PM
#2
TECH Enthusiast
iTrader: (18)
Join Date: Jan 2007
Location: the chi/ addison Il
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
look not trying to be condescending but have you tried using the search this forum option located at the top right hand corner right next to thread tools? If so try searching cam recommendation or other variations of that and you'll come up with about a million threads about this same topic and people with cars almost just like yours but for what its worth I would say get a a TR224
01-04-2011, 11:18 PM
#7
LOL, this is almost identical to this other thread: https://ls1tech.com/forums/generatio...endations.html
Haha, same people with pretty much the same responses.
Haha, same people with pretty much the same responses.
Trending Topics
01-04-2011, 11:43 PM
#9
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 79 Likes
on
70 Posts
These threads have become downright comical to me. I chuckle every time a new one pops up. And I see the same response so I stick in my same response.
01-05-2011, 01:00 AM
#12
Well according to the OP's use for the car its the logical choice to be a mild cam. The hard part these days is figuring out what type of lobes you want. Anyone can sling some numbers out there and hope its gonna make power. Chances are it will, but may be far from ideal. I am all about getting useful power from a cam swap. After doing it the wrong way and the right way (according to myself) I would only do a big cam with supporting mods and planned top end rpms. I have had a 222/226 cam, but it was an XE grind from like 10 years ago nearly. The EPS one is probably far superior to it in a number of ways I have yet to calculate. I am partial to what I have seen come from Geoff on those cams, so maybe I am a bad person to ask. Although, its hard to go wrong with a custom cam from someone that knows what they are doing.
