Appearance & Detailing Interior & Exterior Appearance Modifications
Sponsored by:
Sponsored by: DashLynx

what to clean my intake with??

Thread Tools
 
Search this Thread
 
Old 01-06-2011, 11:35 AM
  #1  
11 Second Club
Thread Starter
iTrader: (1)
 
milleniumm6z28's Avatar
 
Join Date: Jul 2008
Location: Mohnton, PA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default what to clean my intake with??

i have a fast 92mm that has oily marks on it... what is the safest way to clean the intake
Old 01-06-2011, 11:47 AM
  #2  
11 Second Club
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 21 Likes on 17 Posts

Default

mix some degreaser (super clean, purple power, etc) 50/50 with water and spray it on with a bottle, scrub with a brush, rinse with high pressure
Old 01-06-2011, 02:16 PM
  #3  
TECH Fanatic
iTrader: (10)
 
DAVE00's Avatar
 
Join Date: Jul 2007
Location: Houston, TX
Posts: 1,739
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by thunderstruck507
mix some degreaser (super clean, purple power, etc) 50/50 with water and spray it on with a bottle, scrub with a brush, rinse with high pressure
I'm pretty sure you are not supposed to use Purple Power on aluminum as tons of guys have reported it damaging aluminum and it says on the bottle not clean aluminum with it (even if it's diluted I'm not sure I'd trust it). I'd use simple green and some mothers polish and good ole elbow grease.
Old 01-06-2011, 02:19 PM
  #4  
TECH Fanatic
iTrader: (10)
 
DAVE00's Avatar
 
Join Date: Jul 2007
Location: Houston, TX
Posts: 1,739
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by milleniumm6z28
i have a fast 92mm that has oily marks on it... what is the safest way to clean the intake
DOOH - if you mean an LS based intake and not (Throttle Body) then forget what I said about Purple power as it will probably work just fine on the composite intake.



Quick Reply: what to clean my intake with??



All times are GMT -5. The time now is 08:17 AM.