18's on stock springs
01-12-2011, 05:58 AM
#2
TECH Enthusiast
Join Date: Sep 2002
Location: Clinton Twp. Michigan
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Here is a shot of mine on 18x10.5 Z06 replica's. Stock springs. If i lowered it, would have clearance issues probably. I like the way it looks now. And on mine, i think the drivers side sits a touch higher than the passenger side..typical fbody lean.
Last edited by ZYA_LTR; 01-12-2011 at 05:22 PM.
Trending Topics
01-13-2011, 05:36 AM
#8
TECH Enthusiast
Join Date: Sep 2002
Location: Clinton Twp. Michigan
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
I thought it looked lower too, but i doubt that it has the "SLP option" springs you are speaking of, it' a Z28---SS Clone car, previous owner did the parts swap. He did have lowering springs on it, but he sold those and put the factory springs back on it. The tires are 27" as opposed to the factory 26" though, so that eats up some wheelwell.
01-13-2011, 12:36 PM
#10
Teching In
iTrader: (2)
Join Date: Jan 2011
Location: North East Alabama
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
here is mine on stock springs Zo6 reps
in this picture i was running kumho 275/35/18 in the front 295/35/18 in the rear i now have 275/40/18 in the rear now
in this picture i was running kumho 275/35/18 in the front 295/35/18 in the rear i now have 275/40/18 in the rear now
Last edited by trevorss00; 01-13-2011 at 12:40 PM. Reason: added more
01-14-2011, 11:43 AM
#17
TECH Apprentice
Thread Starter
iTrader: (5)
Join Date: Mar 2006
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
MY car is a 1LE so I have stiffer springs and Koni's but I DD (70 miles round trip) it on CA freeways so too low and its gonna get painful. I am going with the 275-40-18 tires cause I got a good deal for Pirellis and I have the tires on my boxster and they have been up to par.
