International Members - Official Germany Roll call.




View Full Version : Official Germany Roll call.


jimbos'ss
01-17-2011, 10:02 AM
Lets get a list of LSx based car owners going so we can organize track days etc like the mustang guys do. This way we can also determine who like myself t00ns etc.

1.jimbos'ss-2001 Z28 (graf)
2.ajjones44-2010 CTS-V (Stuttgart)
3.kidreno 21-2001 SS (Schweinfurt)
4.Asian LSX-2001 TA (Baumholder)


black06g85
01-17-2011, 10:22 AM
ha another fellow ls1 convert.

jimbos'ss
01-17-2011, 10:25 AM
ha another fellow ls1 convert.

yessir, couldn't stay with FWD ecotecs forever :nod:


ajjones44
01-22-2011, 08:46 AM
1.jimbos'ss-2001 Z28
2.ajjones44-2010 CTS-V (Stuttgart)

jimbos'ss
01-22-2011, 11:21 AM
awesome thats two, great idea on putting the location.

ajjones44
01-22-2011, 01:48 PM
There are actually a lot of vetts, 4th and 5th gen camaros rolling around in stuttgart. Only one V though :)

jimbos'ss
01-23-2011, 05:32 AM
yah there's a few fbody's and some vette's and gto's here in graf as well. haven't seen a V over here though. I almost bought an 04 cts-v, just didn't want to wait for it to get shipped here.

kidreno_21
01-28-2011, 08:15 AM
I am in Schweinfurt. Engine is blown though. #4 piston is gone and there looks to be an excess of ring end gap. Thinking about shipping the short block back to Scoggin' Dickey and have them do a rebuild. Huge pain in my ass.

jimbos'ss
01-29-2011, 03:40 AM
I am in Schweinfurt. Engine is blown though. #4 piston is gone and there looks to be an excess of ring end gap. Thinking about shipping the short block back to Scoggin' Dickey and have them do a rebuild. Huge pain in my ass.
ouch thats gonna be pricey on the shipping, a friend of mine had a texas speed 383 stroker shipped over and it cost him about 700 for shipping. have you thought about rebuilding it your self with a forged rotating assembly?

Asian LSX
01-30-2011, 08:09 AM
Baumholder here, but not for much longer. PCS'ing this summer. I know of 6 5th gens here and they are everywhere.

jimbos'ss
01-30-2011, 08:19 AM
Baumholder here, but not for much longer. PCS'ing this summer. I know of 6 5th gens here and they are everywhere.

where you headed too next? did you have the 12 bolt shipped over here and how much was the shipping if you did? yah bunch of C5's here in graf too. my buddy owns one of them.

Asian LSX
01-30-2011, 08:37 AM
where you headed too next? did you have the 12 bolt shipped over here and how much was the shipping if you did? yah bunch of C5's here in graf too. my buddy owns one of them.

Going back to Stewart and I'm actually excited. I love that area in the south and FLA is right there. :D

I actually got the car over here and the previous owner already had the 12 bolt put in prior to shipping the car over here. Before I totaled my SS, I had inquired with Vengeance and if I remember correctly it would have been like 700-1g to have a 12 bolt shipped over here. They said they would have to send it to the nearest airport on a pallet and I'd have to pick it up. There has to be another way but that's what they told me. I also bought some ARH LTs from them last year and it was like 1400 shipped.

jimbos'ss
01-30-2011, 09:07 AM
Going back to Stewart and I'm actually excited. I love that area in the south and FLA is right there. :D

I actually got the car over here and the previous owner already had the 12 bolt put in prior to shipping the car over here. Before I totaled my SS, I had inquired with Vengeance and if I remember correctly it would have been like 700-1g to have a 12 bolt shipped over here. They said they would have to send it to the nearest airport on a pallet and I'd have to pick it up. There has to be another way but that's what they told me. I also bought some ARH LTs from them last year and it was like 1400 shipped.

damn 1400 to ship LT's my buddy got his shipped for less than a hundred through USPS. the 12 bolt sounds about right on shipping though. probably the only thing that will hold me back on getting one.

GL at stewart, i wish i was heading somewhere warm right about now.

Asian LSX
01-30-2011, 09:20 AM
damn 1400 to ship LT's my buddy got his shipped for less than a hundred through USPS. the 12 bolt sounds about right on shipping though. probably the only thing that will hold me back on getting one.

GL at stewart, i wish i was heading somewhere warm right about now.

1400 was only about 100 bucks for shipping. I had gotten the race 1 7/8s and ORY since I took off all the emissions crap. The Hookers coating have just about had it. Looking foward to getting out of the cold.

jimbos'ss
01-30-2011, 11:50 AM
1400 was only about 100 bucks for shipping. I had gotten the race 1 7/8s and ORY since I took off all the emissions crap. The Hookers coating have just about had it. Looking foward to getting out of the cold.

yah i'm torn about which headers to get, i know i want 1 7/8's primaries, but then i'm stuck between kooks which =$$$$ or getting TSP or hookers coated ones and worry about the coating.

Asian LSX
01-30-2011, 06:18 PM
If you saw what my Hookers look like, you'd seriously consider going stainless. But then again TSP's and others seem like good value for the money so benifits go both ways.

If you guys up in Graf are doing some kind of meet I might have to drive up there before I leave and see some REAL cars lol.

ajjones44
01-31-2011, 03:07 PM
yah i'm torn about which headers to get, i know i want 1 7/8's primaries, but then i'm stuck between kooks which =$$$$ or getting TSP or hookers coated ones and worry about the coating.

They will ship the headers over here?

jimbos'ss
02-01-2011, 09:03 AM
They will ship the headers over here?

yup, contact texas speed, thats who my buddy got his kooks shipped through. make sure they know to ship them usps. due to the size restrictions would probably have to be in a separate box for each header. i just got my strano sway bars in today and that box is huge.

jimbos'ss
02-01-2011, 09:06 AM
If you saw what my Hookers look like, you'd seriously consider going stainless. But then again TSP's and others seem like good value for the money so benifits go both ways.

If you guys up in Graf are doing some kind of meet I might have to drive up there before I leave and see some REAL cars lol.

we usually coordinate with the mustang guys and do something once every couple of months in the winter, as spring approaches, racewars and bitburg and usually a trip to the ring. i'll keep everything posted in this thread or get my website changed over for us when i have some time.

Asian LSX
02-01-2011, 01:25 PM
we usually coordinate with the mustang guys and do something once every couple of months in the winter, as spring approaches, racewars and bitburg and usually a trip to the ring. i'll keep everything posted in this thread or get my website changed over for us when i have some time.

Are dates for Bitburg out yet? I went last year and missed registration by like 20 mins thanks to the Polizei. :bang:

Shoot me a PM in advance if theres a meet going on so i can make plans to make it.

jimbos'ss
02-01-2011, 03:05 PM
Are dates for Bitburg out yet? I went last year and missed registration by like 20 mins thanks to the Polizei. :bang:

Shoot me a PM in advance if theres a meet going on so i can make plans to make it.

idk, but i can check real fast....couldn't find any info on the bitburg drag day 8.
season opener for GRW is the 19-22nd of may though. probably the only one i'll make it to cause of my upcoming deployment.

SINCWS6
02-01-2011, 05:20 PM
I just got orders to Ram but I don't think I'm gonna bring my car!

jimbos'ss
02-02-2011, 01:22 AM
I just got orders to Ram but I don't think I'm gonna bring my car!

you'll miss it if you don't.