Group Purchase Requests - 104 mm Airlid

Need it to complete my new SD set-up :)

if we can get a good deal, count me in!

yeah bring that low price on...

Why dont u pm the FTRA rep that posts on here and get something started. I have 1 and love it. Good luck

I want a clear 104 MM lid. Count me in

Damn. No dice yet :(

+1 for a clear 104 lid.

I need a 104

I'm definetely in!

i also need a 100maf but hopefully i can talk to slowhawk this week about SD tune. the weather changes here drastically so more than likely i will go MAF!

im wanting a clear 104 also

im in

im in for a ftp 104 and 100mm tsp maf for a good price.

Clear 104 mm for me as well. I'm in if the price is right... ;)

PM's sent to Fast Toys and TSP

I'd be down for 2 clear 104mm if the price is right.

Hi Everyone,

First off, we do NOT MAKE the clear 104mm lids any more. The pricing on the clear plastic skyrocketted and to make things worse, it was hard to order in the plastic without scratches and flaws. We ONLY offer the black lids in the 98 and 104mm versions.

We would need at least 10 orders to make a group buy happen on the Black 104mm lids. The pricing would be 152.99 including free shipping within the continental U.S and Canada.

We'll make the cutoff date March 7th for people to order. If we do not get at least 10 orders, the Group buy would be cancelled and nobody would be charged. Group buy orders will not ship until we get 10 orders placed.

If you want to order online, make sure you put LS1TECH Group Buy : 152.99 in the comments section of your order. We will adjust your order to the group buy amount and you will not be charged unless the group buy goes through.

You can also order via phone @ 877-955-4896

We will not be repeating the group buy so if you want a lid at a reduced price, get your order in!

ps. We do sell the TSP 100mm MAF's as well but per the TSP GB thread, we cannot do a group buy on those. However, if you want one, get your order in as they are expected to sell out quickly in the spring rush!

Thanks!

Phil @ FTP

If we order the lid and maf can we get the maf shipped for free too?

If we order the lid and maf can we get the maf shipped for free too?

Yes we could do that.

In for a lid! I'll order tomorrow.

Yes we could do that.

How about you match the price texas speed sells them for too :D

I'll be ordering today.

Everybody post up when you've ordered so we can keep a tally in order to meet the required 10 :)

Mine is ordered.

Thanks Yusi!

Ordered mine today as well. What coupling is everyone using to connect to a 102 TB for a SD tune?

Ordered mine today as well. What coupling is everyone using to connect to a 102 TB for a SD tune?

When I was thinking about speed density, I saw this, it looks like it would work well if you cut it in half or somthing:

http://cgi.ebay.com/ebaymotors/OBX-Reinforced-Silicone-Coupler-Straight-4-4-x10-long-_W0QQcmdZViewItemQQhashZitem563940f8b6QQitemZ37032 7746742QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

Im highly interested. Do these lids clear the SS hoods without any modification? I have an aftermarket ss hood.

Will be ordering tomorrow! Can we get a count on the number of lids ordered, PLEASE!!!!

2 orders in so far.

The lids will work with the SS hoods but you will have some rubbing. People usually put a piece of tape of the soft adhesive velcro in the spots that touch to prevent paint rub through.

i'm not sure a 4 inch hose will go over the lid will it? 108 mm = 4.25 inch. FTPP you have a solution/recomendation? With pics ? :)

i'm not sure a 4 inch hose will go over the lid will it? 108 mm = 4.25 inch. FTPP you have a solution/recomendation? With pics ? :)

Ive seen the 4" hose installed on a ftp 104, you just gotta stretch it over the top.

I'd been in for one! Was wondering if anyone has ever gotten the clear version and painted it (possibly from the inside). I know the MTI clear lid's are a little wavy. I say this because if I got the regular black one, I'd want to sand it to make it smoother and painting the clear would fix that issue. Either way I'm in

i'm not sure a 4 inch hose will go over the lid will it? 108 mm = 4.25 inch. FTPP you have a solution/recomendation? With pics ? :)

I'm interested in this as well.

Does the lid have any fitment issues with a stock WS6 hood??

As far as ive heard everyone says fitment issues are little to none.. everyone that is interested get their orders in, it ends in a couple days!

Calling tmrw to order one, now I need to find a bellow for the 104 to 102 for my SD setup.

i'll be ordering tomorrow

+1 ordered

5 orders placed. Get yours in if you want a lid. There will not be another group buy if you let this one slip by.

Unfreakingbelievable.

Everyone talks about wanting one of these lids all over the site and when FTTP runs a GP 4 other people order.

If I would have known it would take this long to get 10 orders (and the jury's still out on that) I would've just paid the extra cash and ordered 2 weeks ago.

Just put my order in

Unfreakingbelievable.

Everyone talks about wanting one of these lids all over the site and when FTTP runs a GP 4 other people order.

If I would have known it would take this long to get 10 orders (and the jury's still out on that) I would've just paid the extra cash and ordered 2 weeks ago.

+1 There was soooo much talk about people wanting this. I even posted in the classified parts section and getting a little bit of interest. I think we should be around 6 or 7 now. I placed my order last night.

Excellent. I think we are at 7 now; possibly 8.

I posted in the Gen 3 External :cheers:

I'll be calling to order mine tomorrow, too much has been going on to get a chance to do so. I hope this GP can happen, even if people don't NEED the lid now, its a great price to buy for future builds!

Hell yea! Or order a couple and sell one to a buddy! Get your orders in quick, tomorrow is last day!! Also, can we get a count on where we are at?

Right now we have 7 orders submitted on the group buy. We have decided to extend the group buy until Friday to get in the few more orders.

Thanks!

When can we expect to receive our lids?

When can we expect to receive our lids?

Assuming the group buy goes through by Friday (which it should), orders would ship out next week and then allow 4-6 days for delivery.

So then if we get 10 before friday will you start shipping them sooner?

So then if we get 10 before friday will you start shipping them sooner?

Normally yes but we are sold out of them right now and the next production run is going to be ready Friday or Monday so we can't ship any sooner.

Ok sweet, we get a nice fresh batch lol.

8 orders in now.

Why dont u pm the FTRA rep that posts on here and get something started. I have 1 and love it. Good luck

i guess it happened for you guys. congrats. u will love it. To bad u couldnt get the clear 1. It really dresses up under the hood. I get a compliment every time I pop my hood. U will also get the occassional" Where the hell did u get that? How big is that thing!!" (im talking about the lid, lol)

Unfreakingbelievable.

Everyone talks about wanting one of these lids all over the site and when FTTP runs a GP 4 other people order.

If I would have known it would take this long to get 10 orders (and the jury's still out on that) I would've just paid the extra cash and ordered 2 weeks ago.

i was just thinking the same damn thing. come on people. its worth the $$. I paid over 200 for mine

Yea its a great deal! Tax return time, everyone stop being a cheap ass!

I have a feeling a lot of people just don't know about this. I wouldn't have, if it wasn't for the post in the Gen III External Section. Good marketing guys. Maybe we need to bump in that section, because I never look in the group purchase request forum.

Probably would help if this was in the actual group purchase section or if it is everyone bumped that post instead of this one. I rarely look in the request section. Always look at the other section of what is actually on group purchase.

Yea I put it in the parts section too. However, I can't post in the group purchase section because I am not a sponsor.

9 orders in!

I want in on this if possbile still?

I want in on this if possbile still?

Yes you can still order until End of Day Friday.

Thanks

I need a 104...Please pm with details..

Jim

I need a 104...Please pm with details..

Jim

You can either order online about put "LS1TECH Group Buy" in the comments field to get the group buy price or call us tomorrow or Friday at 877-955-4896.

You can either order online about put "LS1TECH Group Buy" in the comments field to get the group buy price or call us tomorrow or Friday at 877-955-4896.

People are PM'ing me trying to buy my 85 lid and 85 MAF before this GP is even closed lol :D

People are PM'ing me trying to buy my 85 lid and 85 MAF before this GP is even closed lol :D

lol tell them to hit me up.

i hate they arent able to do clear anymore

i hate they arent able to do clear anymore

Clear was a PIA for me. Always got a film of dirt inside. Constantly cleaning it was irritating.

We have enough orders now. We will start shipping as soon as they are back in stock. Anyone that still wants to get in can do so until 6:00 pm CST tomorrow. Thanks!

i just placed mine about 5 min ago

Clear was a PIA for me. Always got a film of dirt inside. Constantly cleaning it was irritating.

yeah i could see where that would get to be a PITA

Is 98mm lid a part of GP? Pmed.

Thanks everyone who made this happen!

Thanks everyone who made this happen!
Ditto.

And you're welcome :D

Is 98mm lid a part of GP? Pmed.

No they are not. This group buy is for the 104mm lid only.

Any estimate on when the batch will arrive and ship out?

Got my order in today!

Any estimate on when the batch will arrive and ship out?

He told me middle of next week.

Damn I really could use this thing before next friday.

damn i missed out, anyone order a extra i will buy it from you.

Is this done forsure? I want in :(

The boss said that if you get your order in today before 6pm CST, we will honor the group buy price. That's the absolute last call!

Order in :D

Oh course I miss this. :bang: Hopefully there's another one sometime this year. I know someone else that would definitely be looking for one too.

Can you guys post when shipping begins? :)

damn, any chance this will happen again??

damn, any chance this will happen again??

Not likely. It took 3 weeks just to get the ten orders. People ask for group buys and then when they happen, they always struggle to get enough orders.

Not likely. It took 3 weeks just to get the ten orders. People ask for group buys and then when they happen, they always struggle to get enough orders.

Yea, luckily we got enough!

Not likely. It took 3 weeks just to get the ten orders. People ask for group buys and then when they happen, they always struggle to get enough orders.

We know EXACTLY how yOu feel!

MY LID IS SUPPOSED TO ARRIVE TODAY! :fluffy:

Now I have to measure the outer diameter of my 90 mm FAST TB and the outer diameter of the 104 mm lid and hit Home Depot for a plumbing tube to connect them :D

MY LID IS SUPPOSED TO ARRIVE TODAY! :fluffy:

Now I have to measure the outer diameter of my 90 mm FAST TB and the outer diameter of the 104 mm lid and hit Home Depot for a plumbing tube to connect them :D

Mine just came in today! I also ordered a 100mm tsp maf tho and it came with a 4" coupler that is very tight on the maf (maf OD is 104mm) which is smaller than the OD on the Lid (108mm).

Mine just came in today! I also ordered a 100mm tsp maf tho and it came with a 4" coupler that is very tight on the maf (maf OD is 104mm) which is smaller than the OD on the Lid (108mm).

Thanks for posting that! Now all I have to measure is my TB OD.

DAMNIT! My lid didn't come today! Now it says delivery tomorrow! :mad::mad::mad:

My lid showed up on Thursday, woo-hoo!

Hey Fast Toys, the OD of my 100mm MAF is smaller than the ID of the new lid (by just a couple mm's). What do you all do to get it to fit? I was gonna use some electrical tape around my MAF, but I'm hoping for a less "rigged" solution.

Also, these lids feel so flimsy that I don't really want to clamp down too hard on the band clamp that came with it.

Solutions?

My lid showed up on Thursday, woo-hoo!

Hey Fast Toys, the OD of my 100mm MAF is smaller than the ID of the new lid (by just a couple mm's). What do you all do to get it to fit? I was gonna use some electrical tape around my MAF, but I'm hoping for a less "rigged" solution.

Also, these lids feel so flimsy that I don't really want to clamp down too hard on the band clamp that came with it.

Solutions?

If you can Mike find a small 4 inch coupler, maybe 3 inches long. Stretch it over the lid and MAF and it will be a tight seal. Had to do that with a 3 inch coupler on my lid

My lid showed up on Thursday, woo-hoo!

Hey Fast Toys, the OD of my 100mm MAF is smaller than the ID of the new lid (by just a couple mm's). What do you all do to get it to fit? I was gonna use some electrical tape around my MAF, but I'm hoping for a less "rigged" solution.

Also, these lids feel so flimsy that I don't really want to clamp down too hard on the band clamp that came with it.

Solutions?

The lid was sized for the TSP 100mm MAF. Other MAF's like the LPE version are a few mm's smaller. For those MAFS, you can wrapt a few layers of electrical tape around the MAF or go to home depot and get the thinnest adhesive backed foam weather stripping and wrap a layer of that around the MAF.

To check your seal, put a little disk washing soap in some water and spread it with your fingers around the neck of the lid near the MAF connection. Blow some air through the lid (fan or air compressor nozzle) and see if you see any bubbles or air movement. If you have none, you have a good seal.

The lid was sized for the TSP 100mm MAF. Other MAF's like the LPE version are a few mm's smaller. For those MAFS, you can wrapt a few layers of electrical tape around the MAF or go to home depot and get the thinnest adhesive backed foam weather stripping and wrap a layer of that around the MAF.

To check your seal, put a little disk washing soap in some water and spread it with your fingers around the neck of the lid near the MAF connection. Blow some air through the lid (fan or air compressor nozzle) and see if you see any bubbles or air movement. If you have none, you have a good seal.

Can you tell me where to get a bellows tube to connect the lid to my 90mm TB?

I have a 3-4" coupler on my current set-up but that won't fit on the 104 lid obviously :D

So I would need a 4 3/8" to 4" coupler :confused:

Where the heck do I get that???

Can 4" fit over the lid without damaging it?

Got mine the other day. Has two small gouges inside, but other than that it looks good.

Got mine the other day. Has two small gouges inside, but other than that it looks good.

Mine only had 1. Oh well.

But I'm not so sure about testing the MAF's seal while blowing soapy water at it.

I'll figure some else out.

Just drilled a 5/8" hole with a Diamond Tile drill bit.

Not likely. It took 3 weeks just to get the ten orders. People ask for group buys and then when they happen, they always struggle to get enough orders.

I would have gladly got in on it but when I asked for dimensions from you over a month ago you told me you would get back to me "in a couple weeks" after you had some in stock - and that never happened.

It's not ALWAYS the cutomers reason they don't spend the money.

I would have gladly got in on it but when I asked for dimensions from you over a month ago you told me you would get back to me "in a couple weeks" after you had some in stock - and that never happened.

It's not ALWAYS the cutomers reason they don't spend the money.

Sorry if someone did not get back to you. We were very busy shipping orders for the group buy. We sold out the batch of lids and are making more.

DAAAMMMN! I guess I need to look in this section as well. I live on the classified forum. I would have jumped on the deal for the lid.

Just sucks that my email specifically said I wanted to get on the group buy and I got dicked out of it waiting for an email that I never got even after I tried to follow up.

Especially seeing ya complaining that there weren't enough buyers....