Stereo & Electronics - Pac controller help me I'm at the end of my rope

I bought a pac controller from another member . He said it was working when he pulled it out . I don't know where the pink or green wire goes . The black wire is plugged into the back of the deck .


http://i706.photobucket.com/albums/ww61/jaysan1/0123110804.jpg

http://i706.photobucket.com/albums/ww61/jaysan1/0123110805.jpg

What harness is this for ?


http://i706.photobucket.com/albums/ww61/jaysan1/0123110807.jpg

Here is a site I found to help me program the pac controller
http://www.pac-audio.com/swixprogramming/showstepbystep.asp?InterfaceChecked=3&RadioGroupPioneer=0&mmSearch=Pontiac&Submit2=Search+Vehicles&ID=97


I have an 02 ta , Will all the buttons work ? Because I thought about paying some one to do it but every store I talked to wants like $80

Any tips on programming ?

follow directions from pac site and it will do everything

ok but where does the green wire go ? and Do I have to wire in the pink wire ?

all you need to connect is the black, red and green wires.

check this thread out.

http://www.ls1tech.com/forums/stereo-electronics/1223491-pac-swi-ps-help-please.html

What harness is this for ?


[IMG]http://i706.photobucket.com/albums/ww61/jaysan1/0123110807.jpg[/]

disk changer if i remember correctly. something to do with monsoon.

disk changer if i remember correctly. something to do with monsoon.

I don't have a disk changer haha , but I do have a monsoon

I don't have a disk changer haha , but I do have a monsoon

yup all teh fbodys came with that connection so no worries on it. just ignore it