345/40/18
01-25-2011, 02:58 PM
#5
Not even close !! First of all you would need a 12-13" wheel, factory C6Z stuff or aftermarket wheels. Then they would stick out 2-3" past the fender. Not to mention they are almost 29" tall.
Like the previous poster said, L5's, TPE's or minitub. That 3:15 gear with a 29" tall tire, you better be putting down some serious HP to even get it moving.
Stock Tire - 345/40R18 >Search Tires
Section Width: 13.58 in 345 mm
Rim Diameter: 18 in 457.2 mm
Rim Width Range: Unrecognized tire size.
Overall Diameter: 28.86 in 733.04 mm
Sidewall Height: 5.43 in 137.92 mm
Radius: 14.43 in 366.52 mm
Circumference: 90.66 in 2302.7 mm
Revs per Mile: 720.7
Like the previous poster said, L5's, TPE's or minitub. That 3:15 gear with a 29" tall tire, you better be putting down some serious HP to even get it moving.
Stock Tire - 345/40R18 >Search Tires
Section Width: 13.58 in 345 mm
Rim Diameter: 18 in 457.2 mm
Rim Width Range: Unrecognized tire size.
Overall Diameter: 28.86 in 733.04 mm
Sidewall Height: 5.43 in 137.92 mm
Radius: 14.43 in 366.52 mm
Circumference: 90.66 in 2302.7 mm
Revs per Mile: 720.7
Trending Topics
01-26-2011, 05:10 PM
#8
Like everyone else said you need a 12 to 13 inch wheel to fit. If the rim is not wide enough you will not get anymore contact patch from a 345 than you would a 315. The 345 would have about an inch on each side that would never wear out because it would never touch the ground.
01-31-2011, 09:30 PM
#13
Launching!
Join Date: Dec 2005
Location: The Midwest
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Actually, a 335/30/18 fits without minitub. I have ccw classics with just the right offset, that it fits snugly.
However the op listed tire, that's a BIG f'n tire. 345/40/18 is tall as **** and will NOT fit under even a stock height vette.
Aj
However the op listed tire, that's a BIG f'n tire. 345/40/18 is tall as **** and will NOT fit under even a stock height vette.
Aj
