02sslayer

iTrader: (4)

im getting the intake in a couple days. i have ported ls6 heads tsp tsunami cam 235/240 .648/.608 111lsa. and of course headers, duals and slp lid and CAI.

car made 426rwh 390rwtq on a mustang dyno. what do you guys think i will pick up with the new intake unported with stock maf and slp lid?

and what do you guys think it would make ported, with slp 85(90)mm maf and FTP 98mm lid?

thanks for your suggestions in advance

1nasty86

iTrader: (63)

should pick up 15-20 with the intake and 10-15 with the maf, lid,etc.

slt200mph

iTrader: (42)

Gains over a LS6 intake .... Unported 10-14 HP ... ported 22-28 HP depending on who ports it.

smg267

iTrader: (23)

22 hp from a ported 90/90??? Might have to get mine ported before install.

*02WS6TURK*

iTrader: (13)

Probably 1 or 2 at the rear because you are from Washington.

GoFastKid

Easy 20. Friend of mine picked up 23rwh with a unported 90/90 combo on his 2002 camaro, ls6 heads stage 2, and a tv3. Stock maf and slp lid.

02sslayer

iTrader: (4)

damn i forgot i even started this thread lol. im at 426 now im hopin for close to 450. if i had the money i would do the following things first

slp 85mm maf
ftp 98mm lid
port the intake and tb, i guess i could just wait a lil longer and get that stuff done. it would probly be smart if i dont wana get it retuned twice. then hell i could be in the 460 range

02sslayer

iTrader: (4)

do you guys think i should wait and do it right the first time?

02sslayer

iTrader: (4)

well i think im probly gonna go ahead and at least buy the lid and slp maf. might wait for porting tho

*02WS6TURK*

iTrader: (13)

Joe, buy that used 85mm MAF from Tylers friend and a 98mm lid from Fast Toys before you go porting anything. You will pick up good gains w/o the port. Port it if and when you ever decide to replace the heads like you've talked about doing.

02sslayer

iTrader: (4)

that sounds like a good idea. i dodnt really feel like sending off the intake right now and i kinda need to get it runnin again