Installed a Accurate Mach. Works Catch Can!
02-11-2004, 07:40 PM
#1
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: DFW, TX
Posts: 1,222
Likes: 0
Received 0 Likes
on
0 Posts
Installed a Accurate Mach. Works Catch Can! About a week ago I installed a Catch Can that was made by Accurate Machine Works. The install was a piece of cake, and I checked the can today and found my can w/ a nice coating of oil on the inner walls of the can and a nice puddle at the bottom. I was amazed it caught that much oil in a week! Here are some pics below. **Advertisement removed**
Last edited by WILWAXU; 02-11-2004 at 07:46 PM.
02-12-2004, 06:00 PM
#3
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: DFW, TX
Posts: 1,222
Likes: 0
Received 0 Likes
on
0 Posts
install literally only took about 10 minutes. its as easy as:
-Unhooking the PCV valve from the tube, pulling the tube off of the TB.
-Mounting the Catch Can (2 screws)
-and then running the hoses from the catch can to the PCV and TB.
-Unhooking the PCV valve from the tube, pulling the tube off of the TB.
-Mounting the Catch Can (2 screws)
-and then running the hoses from the catch can to the PCV and TB.
02-12-2004, 07:11 PM
#5
TECH Apprentice
Join Date: Nov 2001
Location: Fort Worth
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FstBlkz28
About a week ago I installed a Catch Can that was made by Accurate Machine Works. The install was a piece of cake, and I checked the can today and found my can w/ a nice coating of oil on the inner walls of the can and a nice puddle at the bottom. I was amazed it caught that much oil in a week! Here are some pics below. **Advertisement removed**
