Dyno'd My Car This Weekend
#1
Dyno'd My Car This Weekend
Made 467/418. Pretty content with the setup. It pulls really hard up top. Thanks to everyone involved in helping me get my car to this point
Mods:
Torquer V2 Cam (232/234 .595/.598)
Ported and Milled 243s (60cc)
FAST 92/92
Flycut pistons (.1)
GM MLS head gaskets (.051)
LS7 Lifters
Pacesetter 1 3/4 LTs
TSP True Duals
25% ASP UDP
42# Greentops
255 walbro
FTP 98mm lid
M6 - 10bolt - 3.42s
Full speed density tune by Brian @ Reckart Performance
http://www.youtube.com/watch?v=Hhx03oKTbFQ
Mods:
Torquer V2 Cam (232/234 .595/.598)
Ported and Milled 243s (60cc)
FAST 92/92
Flycut pistons (.1)
GM MLS head gaskets (.051)
LS7 Lifters
Pacesetter 1 3/4 LTs
TSP True Duals
25% ASP UDP
42# Greentops
255 walbro
FTP 98mm lid
M6 - 10bolt - 3.42s
Full speed density tune by Brian @ Reckart Performance
http://www.youtube.com/watch?v=Hhx03oKTbFQ
#5
9 Second Club
iTrader: (21)
Join Date: Mar 2008
Location: League City, Texas
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Impressive. The only real difference between your setup and mine is the fast intake and tb. That may be changing soon. I like those numbers. I wonder if I could get close to 450rwhp with the fast 92/92 and a better tune. Does it drive and idle fine?
Trending Topics
#9
12 Second Club
iTrader: (18)
good numbers.
shows that with very close mods between our cars (ported 90/90, comp 224 .581 @112 single pattern cam, no flycutting, ewp, lt's/tsp td's, 42's, u/d pulley, heads, 10-bolt/3.42). have been interested in going a larger cam, but i have too much fun with seeing what i can get out of this 224 cam...
always good to see the proven cams perform as they should with a build using complimenting parts!
shows that with very close mods between our cars (ported 90/90, comp 224 .581 @112 single pattern cam, no flycutting, ewp, lt's/tsp td's, 42's, u/d pulley, heads, 10-bolt/3.42). have been interested in going a larger cam, but i have too much fun with seeing what i can get out of this 224 cam...
always good to see the proven cams perform as they should with a build using complimenting parts!