View Full Version : LS7 CLUTCH SALE...Limited Time Only


EastcoastPerformance
01-30-2011, 05:21 PM
http://i620.photobucket.com/albums/tt282/VetteRod-LSX/ECPBanner10-910.gif

Awesome Specials...:D:D

click link below..

http://www.ls1tech.com/forums/corvette-performance/1359100-ls7-clutch-sale-limited-time-only.html#post14184634

venom13132
02-01-2011, 10:27 AM
what kind of HP Torque can the LS7 clutch assembly hold up to? I know the LS7 is rated at 505 HP 475 ft*lb so I would think it would hold more than that safely...

The ls7 clutch kit is the same that is used on the ls3 correct? the part numbers seem to be the same.

LegacyGTBiggie
02-01-2011, 10:32 AM
does this work for 06-07 LS2 powered CTS-Vs? Prety sure it does but I havent researched it completely as I havent picked up my V yet.

EastcoastPerformance
02-03-2011, 02:26 PM
what kind of HP Torque can the LS7 clutch assembly hold up to? I know the LS7 is rated at 505 HP 475 ft*lb so I would think it would hold more than that safely...

The ls7 clutch kit is the same that is used on the ls3 correct? the part numbers seem to be the same.
Hi, I have never checked to see if its the same, never needed to do so...Remember we have these instock at all times plus our kits come with (flywheel, pressure plate, disc & alignment tool)...Yes it will hold 525-550rwhp all day long, but it really depends on the type of driving you do and the type of tires your running...This is not an every week-end drag racing clutch...
does this work for 06-07 LS2 powered CTS-Vs? Prety sure it does but I havent researched it completely as I havent picked up my V yet.

We have never tried it in a 06-07 CTS-V...I think you need to run a different slave than what comes in the car...

Brian'sCharlotte(TA)
02-22-2011, 03:47 PM
Mmm... I have a 2000 Trans Am and I need a clutch Kit. Need a slave too. Any suggestions? I planned on getting the Tick performance Master cylinder as well.

EastcoastPerformance
02-26-2011, 11:27 AM
Mmm... I have a 2000 Trans Am and I need a clutch Kit. Need a slave too. Any suggestions? I planned on getting the Tick performance Master cylinder as well.

Hey Brian, I sent you a PM...thanks for the interest!!!

ThumpnZ28
03-02-2011, 02:07 PM
Hold the sale out for about another two weeks, if you can. I'm still waiting on my trans to come back from the shop. I will need an entire clutch system. PM already sent. Thanks

EastcoastPerformance
03-02-2011, 02:08 PM
Hold the sale out for about another two weeks, if you can. I'm still waiting on my trans to come back from the shop. I will need an entire clutch system. PM already sent. Thanks

No problem, make sure when you call to mention this sale...

devlmaycry
03-04-2011, 04:48 PM
How much does shipping run on these kits?

RyanSws6
03-04-2011, 07:46 PM
I was just thinking of a new clutch for my SS, LS7 holding up in my 408 so good for a 400hp SS. What's S/H costs to FL.?

EastcoastPerformance
03-08-2011, 04:59 PM
How much does shipping run on these kits?

I was just thinking of a new clutch for my SS, LS7 holding up in my 408 so good for a 400hp SS. What's S/H costs to FL.?

Hi guys, both of you have PM's

bovi
03-24-2011, 05:41 PM
Price including shipping to j0h1k0,quebec,canada. If youre the lowest i'll buy.

AiDRocks
03-25-2011, 02:49 AM
I am thinking I need a clutch kit soon. Whats the total cost for a LS6 or LS7?

EastcoastPerformance
03-25-2011, 01:48 PM
Price including shipping to j0h1k0,quebec,canada. If youre the lowest i'll buy.

I am thinking I need a clutch kit soon. Whats the total cost for a LS6 or LS7?

Hi, you guys have PM's

WVZ28
04-06-2011, 07:45 AM
I'm interested. If your price is the lowest shipped to 25411 im in. Let me know. thanks.

EastcoastPerformance
04-07-2011, 01:08 PM
I'm interested. If your price is the lowest shipped to 25411 im in. Let me know. thanks.

Thanks, you have a PM...

buzb026
04-10-2011, 11:39 PM
how long will this sale be going on for? I will be needing a clutch very soon. wouldnt purchase to probably may. Thanks

EastcoastPerformance
04-11-2011, 12:56 PM
how long will this sale be going on for? I will be needing a clutch very soon. wouldnt purchase to probably may. Thanks

Hi, thats no problem, we will take care of you, I promise....just call me when your ready...thanks

06blackedout
04-21-2011, 01:19 AM
im in the market for a clutch kit as well,seen some online ebay kits with 22lb billtet flywheel go for 440 shipped but idk if i can trust them kits.what is the current price on this kit shipped to houston texas 77531

AcE XBOX
04-21-2011, 02:20 PM
hell of a deal. bump! will be contacting you soon!

EastcoastPerformance
04-22-2011, 02:56 PM
hell of a deal. bump! will be contacting you soon!

Hi, thanks we appreciate all you guys...:D:D

EastcoastPerformance
04-22-2011, 02:58 PM
im in the market for a clutch kit as well,seen some online ebay kits with 22lb billtet flywheel go for 440 shipped but idk if i can trust them kits.what is the current price on this kit shipped to houston texas 77531

Hi, please call me directly on this, I will be glad to help you anytime...thanks Mike Yeager 1-864-404-1776...

indyboom
05-07-2011, 02:40 PM
This kit direct fit on 02 ls1's?

EastcoastPerformance
05-09-2011, 11:49 AM
This kit direct fit on 02 ls1's?

Hi, yes sir it will...:nod::nod:

RB5509
05-13-2011, 01:46 PM
do you sell the clutch disks separate from the rest of the kit? its for a 95 trans am. i bought an auto zone kit but dont wanna run the crappy disk that comes with it... if you could pm me a price i'd appreciate it!

EastcoastPerformance
05-19-2011, 11:47 AM
do you sell the clutch disks separate from the rest of the kit? its for a 95 trans am. i bought an auto zone kit but dont wanna run the crappy disk that comes with it... if you could pm me a price i'd appreciate it!

The LS7 disk will not work for you...sorry

greencactus3
05-19-2011, 12:57 PM
Can you quote me price + shipping to 48331 for Disc, Pressure Plate & Alignment Tool? (just missing flywheel)

EastcoastPerformance
05-21-2011, 03:39 PM
Can you quote me price + shipping to 48331 for Disc, Pressure Plate & Alignment Tool? (just missing flywheel)

Which clutch kit..?? why do you want it without the flywheel..??

4door5g
06-01-2011, 11:57 PM
whats the best price shipped to 34473? looking to put this in my 02 ws6. it had a new clutch, and tranny rebuild done about 1500 miles ago, i got it around 1000 ago. i have pulled the tranny put a new slave cyl in it, put a adj mcloud master in it, and i have still been having problems with it. also the pedal has been really stiff with both maters in it, and im having problems with the pedal being right off the floor. even when adj out, it will work good for a day or 2 and be right back to just off the floor. i figure maybe the guy before me got a bad presure plate or something. but eather way im looking to put a new clutch in it.

EastcoastPerformance
06-06-2011, 01:37 PM
whats the best price shipped to 34473? looking to put this in my 02 ws6. it had a new clutch, and tranny rebuild done about 1500 miles ago, i got it around 1000 ago. i have pulled the tranny put a new slave cyl in it, put a adj mcloud master in it, and i have still been having problems with it. also the pedal has been really stiff with both maters in it, and im having problems with the pedal being right off the floor. even when adj out, it will work good for a day or 2 and be right back to just off the floor. i figure maybe the guy before me got a bad presure plate or something. but eather way im looking to put a new clutch in it.

Hi, do you have any shims behind the slave now..?? call me and I will be glad to help you...:D:D

4door5g
06-06-2011, 08:22 PM
nope no shims.

EastcoastPerformance
06-07-2011, 11:54 AM
nope no shims.

What kind of clutch are you running..??
What "2" different Clutch masters have you tried..??

It maybe best to call me and lets talk about it...thanks Mike Yeager 1-864-404-1776...:D:D

4door5g
06-07-2011, 11:14 PM
ill try to call you tom. but i dont get out of work till around 6. as for the master cyl, i used a stock one from advanced auto, that i made adj. and also used a rebuilt mckloud adj one. both were great for the 1st day, but after a day of 2 it would start getting closer to the floor. also the clutch is a advanced auto stock replacement it was the clutch and flywheel kit.

thanks for the help. every one around my area runs auto trannys

jdhedman
06-10-2011, 05:24 PM
I am looking for a GM Performance Slave Cylinder 15046288 shipped to 60585 Paypal Ready

Thanks

Robson
06-13-2011, 06:47 PM
Just ordered mine today , thanks for everything Mike

EastcoastPerformance
06-14-2011, 08:41 AM
Just ordered mine today , thanks for everything Mike

Hey Rob,

You are very welcome sir, we always take care of our buddies from the North...:D:D

EastcoastPerformance
06-16-2011, 05:11 PM
Thanks for all the orders, we are extending these Specials!!!:D:D

blackbird0230
06-16-2011, 05:15 PM
I suppose I could research it more but since you sell these things it's easier to ask you, but I want to replace my stock clutch with the ls7 from you guys but what all would I need to change and buy? I hear I need to get an ls3 flywheel but I have no idea. What all would I need to do this? Thanks for any help, I appreciate it.

O yea I have a 2002 ws6. Haven't messed with the drivetrain at all so it's stock

EastcoastPerformance
06-16-2011, 05:28 PM
I suppose I could research it more but since you sell these things it's easier to ask you, but I want to replace my stock clutch with the ls7 from you guys but what all would I need to change and buy? I hear I need to get an ls3 flywheel but I have no idea. What all would I need to do this? Thanks for any help, I appreciate it.

O yea I have a 2002 ws6. Haven't messed with the drivetrain at all so it's stock

Hi, the Kits we sell will work perfect for your car, we take all the guess work out for you...let me ask you a few questions...

1. How much power at the wheels..??
2. What type of racing do you do..??
3. How much racing..??
4. What type of tires are you running..??
5. Any future plans for Mods, if so what..??

blackbird0230
06-16-2011, 08:06 PM
Hi, the Kits we sell will work perfect for your car, we take all the guess work out for you...let me ask you a few questions...

1. How much power at the wheels..??
2. What type of racing do you do..??
3. How much racing..??
4. What type of tires are you running..??
5. Any future plans for Mods, if so what..??

1.I'm currently 360hp/370tq to the wheels but plan on cam
2.I race at the track 1/4 mile. Occasional but rare street race
3.I race throughout the season, last year I made 20 passes but I won't run as much until I do more mods.
4.i run street tires 275/40 falkens but have access to drag radials for this season.
5.I plan on cam, maybe some wider rears but most likely won't get around to it. I also daily drive this car in the summer.

EastcoastPerformance
06-19-2011, 02:16 PM
1.I'm currently 360hp/370tq to the wheels but plan on cam
2.I race at the track 1/4 mile. Occasional but rare street race
3.I race throughout the season, last year I made 20 passes but I won't run as much until I do more mods.
4.i run street tires 275/40 falkens but have access to drag radials for this season.
5.I plan on cam, maybe some wider rears but most likely won't get around to it. I also daily drive this car in the summer.

Hi,

If your going to track it that much, I would recommend the Mantic ER2 12" Clutch for you, then you want have to worry about beating on it...The Mantic Clutch will take alot more abuse and it will still drive great on the street...And the best of all is we have them on sale right now through the end of March...Its only $729.99 and it comes with a Steel Billet Flywheel, not a cast flywheel like that comes OEM in the LS cars..

LMK...we only have so many we can sell at this price...

blackbird0230
06-19-2011, 03:17 PM
Okay so 600 conplete and shipped? How much is the stage 3 in comparison?

4door5g
06-22-2011, 10:19 PM
should be ordering one next week. i wanted to pull the tranny out and see what was going on with it. it for sure needs a clutch, half the presure plate fingers were way lower then the other half.

EastcoastPerformance
06-24-2011, 05:33 PM
should be ordering one next week. i wanted to pull the tranny out and see what was going on with it. it for sure needs a clutch, half the presure plate fingers were way lower then the other half.

Hi, it definitely sounds like you need a good clutch like the Monster...LMK they are only on sale through next thur at midnight...6/30/2011

EastcoastPerformance
11-01-2011, 03:25 PM
Hey everyone, thanks for all the orders, we are extending these specials!!!

Call Mike Yeager directly to order yours, also if you need any information about the correct clutch and accessories set-up for your car, please dont hesitate to call us...We will spend as much time with you as you want, your the customer and we are here to give you the very BEST Customer Service..

Thanks
Mike Yeager
1-864-404-1776

70LS3Chevelle
01-13-2012, 12:19 PM
PM sent

EastcoastPerformance
01-20-2012, 11:26 AM
PM sent

P.M. Answered

DarkhorSe_SS
01-25-2012, 10:40 AM
:D:D Thanks for all the orders, we are extending all of these Specials!!! :D:D

Ls7 clutch still priced at $399 shipped?

EastcoastPerformance
01-25-2012, 01:28 PM
Ls7 clutch still priced at $399 shipped?

The LS6 Clutch Kit is $399.99 & the LS7 Clutch Kit is $435.99, we also have ALL the other accessories to do a complete & correct clutch install on special too...

:D:D Plus ALL of our Bearings, Slaves & Masters are the most current an updated units available (they have NOT been sitting in a warehouse on the shelf for many years)...:D:D


Call us to get the very best package deal...We have everything instock ready to ship the same day you order...

Freight is not included at any of those prices...

94transamguy
02-05-2012, 11:43 AM
How much shipped to 88101 please?

EastcoastPerformance
02-08-2012, 10:22 AM
How much shipped to 88101 please?

Please give us a call for the very best pricing....

fc_soldier
02-15-2012, 06:54 PM
Pm me details on a kit for my stock 02 WS6.

KrautBurner
02-15-2012, 08:00 PM
what kind of HP Torque can the LS7 clutch assembly hold up to? I know the LS7 is rated at 505 HP 475 ft*lb so I would think it would hold more than that safely...

The ls7 clutch kit is the same that is used on the ls3 correct? the part numbers seem to be the same.


I've had mine in my LS2 GTO (512 RWHP / 620 RWTQ race weight of 4200+ lbs) for over 30K miles
gotten over 200 launches on it so far (best 60' of 1.55)


still very streetable *much better than a twin disk

EastcoastPerformance
02-17-2012, 12:58 PM
I've had mine in my LS2 GTO (512 RWHP / 620 RWTQ race weight of 4200+ lbs) for over 30K miles
gotten over 200 launches on it so far (best 60' of 1.55)


still very streetable *much better than a twin disk


Hey KrautBurner, thanks for the plug :D in our for sale thread... You should post this in other sections were people bash the LS7 clutch kit as not being able to hold that type of power and especially at the race track...


Thanks again
Mike Yeager

turbodarryl
02-19-2012, 07:54 PM
are the Monster clutches on sale??

EastcoastPerformance
02-20-2012, 12:27 PM
are the Monster clutches on sale??

Hi turbodarryl,

Call us directly we have some great deals going on right now...:D:D

ls2gto
02-25-2012, 12:38 PM
Hey KrautBurner, thanks for the plug :D in our for sale thread... You should post this in other sections were people bash the LS7 clutch kit as not being able to hold that type of power and especially at the race track...


Thanks again
Mike Yeager

I have also had awesome luck with the clutch. 2006 GTO race weight 3940 616rwhp/640rwtq best 60' of 1.77 working great! Daily driver mostly but the clutch really holds up in all situations.

Jake

EastcoastPerformance
03-01-2012, 04:38 PM
I have also had awesome luck with the clutch. 2006 GTO race weight 3940 616rwhp/640rwtq best 60' of 1.77 working great! Daily driver mostly but the clutch really holds up in all situations.

Jake

Hey Jake,

thats freaking awesome dude, we have had many cars up in the 600rwhp+ that were street cars which the LS7 Clutch held perfectly fine...

But now you are going to need a Mantic 9000 Series Twin Disc, to handle your next HP jump...:cool::cool: