LSWHO

iTrader: (1)

What do I need?

Also where can you get a baseline tune??

Very Noob questions I suppose. Enlighten me Por Favor.

quik95lt1

iTrader: (7)

IF you are keeping the stock ECM also call horsepower connecttion in WA he has a harness to interface everything........as for the tune I may have something for you...whats the motor combo its going on??

LSWHO

iTrader: (1)

For now it's just a cam only setup. But I need to get something for tuning and I will eventually turbo the car so I figured upgrading would work best in the long run. I don't like to upgrade only to have to upgrade again. Do it once, do it right.

I'm much more in the planning/researching phase than the purchasing phase. Just trying to find the best/cheapest/smartest route. And yes, I know it isn't cheap. but I'm not planning on ever eclipsing quadruple digits so all out is unnecessary.

speedracer2536

iTrader: (15)

I've also considered this as well but to use the stock ecu.. Is there anyway to use a crank trigger and ditch the opti completely with the fast setup?

qc97z

iTrader: (9)

If only Fastbird was around...his T/A has the XFI setup.
I think RealQuick on LTXTech knows something about the XFI stuff as well.

Speed Density

iTrader: (38)

Thats what I did and many others too.

Brian Macy from Horsepower Connection is a super nice guy willing to answer emails, calls and anything at pretty much anytime of the day. He built my piggy back harness for the XFI/Stock PCM combo. If I did it again I'd go full stand alone and just make a new dash. You lose tach with a piggyback.

Tony.

speedracer2536

iTrader: (15)

If you dont mind me asking.. How much did it all run you? do you have part numbers for everything?

Speed Density

iTrader: (38)

I got my box for $1500 or so, dizzy was $380, crank trigger $200*, coil, wires etc + harness. Maybe like $2700 or something. I dont remember off hand.

quik95lt1

iTrader: (7)

yep i did that on mine........now im putting togheter a cam sync dizzy out back in the intake so i can run SEFI again.....