Gen 5 Camaro External Bolt-On Tech - Finally ported my intake and TB.

Well not being able to drive my car this weekend left me plenty of time to finally get around to those free mods Ive been wanting to do.

I ported and polished my throttle body, ported my intake and after seeing how much oil was actually in there, I added some breathers so it wont be sucking in oil any more. So I guess the only non free part was the breathers.


http://img525.imageshack.us/img525/4806/wp000032.jpg
http://img3.imageshack.us/img3/5972/wp000033.jpg

http://img824.imageshack.us/img824/1071/wp000034.jpg

http://img29.imageshack.us/img29/5445/wp000035.jpg

http://img600.imageshack.us/img600/9229/wp000036t.jpg

http://img193.imageshack.us/img193/9259/wp000037.jpg

http://img535.imageshack.us/img535/8679/wp000038.jpg

http://img84.imageshack.us/img84/3838/wp000039.jpg

http://img703.imageshack.us/img703/7977/wp000040.jpg

http://img204.imageshack.us/img204/2505/wp000041.jpg

http://img62.imageshack.us/img62/4848/wp000042.jpg

nice... did you notice any gains? any dyno before and after?

Nah, its too cold outside to even get traction. Im going to get it tuned again though, as I changed the CAI as well.

badass man how long did each part take u?

The TB can be done in less than an hour with a dremel. The manifold was a pita and I would just cough up the dough and order one already done. There were many hours spent on the manifold when it was all said and done.

i too have ported my own, hopefully it will hold up when its time to boost... however i didnt do extensive porting, just went in and removed the imperfections from the injection process and i removed the resonance towers as well... but that looks really good

Unrelated topic, how are you pulling timing for the nitrous? I have the same kit that will going on this spring.

nice work.

let me know tha gain when u get them

Unrelated topic, how are you pulling timing for the nitrous? I have the same kit that will going on this spring.

I was going to run a nitrous tune.