need help
02-05-2011, 09:47 PM
#1
Teching In
Thread Starter
Join Date: May 2010
Location: GA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
need help hey guys ive got a 350 vortec out of a 97 tahoe the motor runs amazing im looking at throwing a cam and 4.10s in it any suggestions on a cam ive got my eye on a few just wondring if any of you have this setup
02-07-2011, 03:30 PM
#3
You want a cam that will work well with your particular heads/intake/headers set up. What do you currently have?
Also your transmission type (auto/manual) and stall speed (if auto) might play a factor in your rear end gear and tire size selection.
Also your transmission type (auto/manual) and stall speed (if auto) might play a factor in your rear end gear and tire size selection.
02-10-2011, 01:51 PM
#4
Teching In
Thread Starter
Join Date: May 2010
Location: GA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
yea my bad on the wrong thread but its a otor ive had in my third gen its still got the stock iron heads im getting bigger valves tho the 4.10s arethe gear im using out back its got an edelbrock performer rpm for the intake its a 5 speed as well carbed