10 Second Club - looking for 10.99




View Full Version : looking for 10.99


beerman985
02-08-2011, 07:58 AM
With the mods in the sig what do you think. its a m6 car has strano springs and bilstion shocks. car has a125 hp. a small cam (222/224 duration with .566/.568 lift and 112 LS.) port and polished 243 heads. 9in with 4.11.


Carter01
02-08-2011, 08:56 PM
With the mods in the sig what do you think. its a m6 car has strano springs and bilstion shocks. car has a125 hp. a small cam (222/224 duration with .566/.568 lift and 112 LS.) port and polished 243 heads. 9in with 4.11.

Kind of hard to say without knowing your NA times. Normally a 150 shot will knock off a solid second in the 1/4. M6 car will be a little harder but very possible.

baalic
02-08-2011, 08:59 PM
Your not already 10.xx?? Slicks maybe or at least a good radial??


Zmg00camaross
02-08-2011, 09:06 PM
Main thing to me with a M6 is a good tire (bias ply). and rowing them gears.

beerman985
02-17-2011, 08:37 AM
the car went a 12.64 na. before heads and cam. and tune

odarabla
02-18-2011, 07:46 AM
the car went a 12.64 na. before heads and cam. and tune

WHat did it do after the heads cam and tune?

-gz-
03-09-2011, 11:00 PM
WHat did it do after the heads cam and tune?

im thinking thats what he is trying to ask everyone here. if it will go a 10.99 or lower now with those mods...

beerman985
03-14-2011, 11:41 AM
That's what I. Wanted to know

TurboStangJON
03-14-2011, 08:38 PM
That's what I. Wanted to know

It's very possible but a couple of variables are going to determine if the car makes it or not. Such as, 60 foot, driver, etc.

beerman985
03-14-2011, 09:30 PM
any good tips about lunching and setting up the car.

beerman985
05-06-2011, 04:33 PM
any good tips about lunching and setting up the car.