Project66impala

iTrader: (3)

i was wondering which cam has good street manners and has a rough idle? im doing an ls1 swap in my wifes truck and she wants a daily driver that has a real lopey and thumping idle any ideas?im only familiar with big block chevy's

boostnut

iTrader: (7)

call these guys. you haven't given enough info on the vehicle & its purpose for anyone to make a fair cam suggestion.

http://www.texas-speed.com/shop/

ebk06

iTrader: (5)

you wont get a car thats great as a daily driver and has a really lopey cam. But you could always pull a plug wire or something to acheive that sound.

Fahrenschnell

iTrader: (1)

try a comp thumper cam.

Project66impala

iTrader: (3)

its a 00 camaro ls1 bone stock and with a 4l60e its in a 49 chevrolet truck 373 posi

speedtigger

iTrader: (16)

In general drivability and rough idle are diametrically opposed. One trick I have used is to run a smaller camshaft but tighten up the lobe separation angle. Something around 225 at .050 with a 107 lobe separation angle might do the trick. However, the tune will have to be spot on.

toxic99

TR224 on a 112 should be lumpy enough and has great street manners. Id suggest putting atleast a 3200 stall in it to help out though.