DeLaRosa25

iTrader: (10)

Going to a local tuner to get my 2000 Trans Am tuned. Once the installs are finished I am going ASAP.

Any idea on how much HP/TQ estimate I should be able to pick up while I am there? I have 0 doubts on his tuning abilities because he is very good.

The mods will be as followed

1)MTI Lid
2)K&N Airfilter
3)Ported TB
4)Dual DMH electric cutouts
5)Magnaflow catback
6)Pacesetter 1 3/4 LT's w/ORY
7)243 heads (not ported)
8)LS6 intake

Everything else is stock.

Just want to get an idea on the ball park. I know every car responds differently. Hope I am in the right section posting this. If not mod please move or delete it.

87silverbullet

iTrader: (11)

If you are doing all that and putting different heads on why not throw a cam in there too. It would make sense to do that if you are going to get a tune on the car.

DeLaRosa25

iTrader: (10)

No money. Planned on the cam and stall for next month..but been having problems with my DD Camaro. Its best to put the money towards a new car. I have no problem waiting on the cam till later in the year.

Detoxx03

iTrader: (14)

340rwhp

87silverbullet

iTrader: (11)

You don't say if you are auto or 6 spd and whether you are going to dyno with the cutout open or closed so Detoxx is close at 340 if its an auto and a tad higher if its a 6 spd.

Detoxx03

iTrader: (14)

He's a auto Bobby.

Rolo I know you wanna wait to get the cam but to save on install and tuning cost I would just wait and do it all at once.

DeLaRosa25

iTrader: (10)

Yea, but the dyno tune isn't really all that much. Steve said he can do it for $350..then any update for $150.. To me it's really not all that much as I intented. And he does a great job for the price. EVI told me about $600-700

When I move out of my place in June to my new place. The cam/stall should be done within 1 month.. 1 1/2 tops. I wont nearly have as much bills and debt will be paid off. Thats why I said it wont really cost that much to me, because I will have more flowing in with my raise


I would be asking Spencer for help with the cam @ his shop. Everything would be done myself (minus the cutout install) to save the cost.

Detoxx03

iTrader: (14)

Which Steve are you talking about? If you already have it planned out to do it that way stick with it. Do you have a idea of what size cam and stall you want?

DeLaRosa25

iTrader: (10)

Steve as in BLKHAWK in Port Huron. Met him today while picked up my 243's.For the cam going with what Larry and Mike suggested. Will be a custom grind through Johhny. Stall will be a 3600. Havn't figured on which brand yet.