Badazz 97 TA

iTrader: (18)

Doing the LS1 lid on my LT1 right now. Ran into a problem. I have the maf mounted on the lid but the harness to plug it in is too short being that it is in a different location now. About 3-4inches short


Is there a MAF extension harness on the market that i can buy(plug and play) without having to splice a new longer pigtail connector? Link? Really trying to avoid splicing. tried searching but couldnt find anything

any help would be great.

Tbird232ci

iTrader: (4)

If you go on Summit, Caspers makes one, part number 109022. Pop the part number in the search bar and it'll come up. It's only 21.95, plus shipping. Might be able to plug the part number into ebay and find something cheaper too.

97 texas ta

Where do u order the stuff to do that?

BlackBird87

iTrader: (6)

I ran into the same problem. i tracked the wires back for the maf and they were taped to the rest of the wire for the iac and tps after i cut to tape i had enough slack to make it reach

Badazz 97 TA

iTrader: (18)

thanks for the part number. Thats what i needed. gonna order it now.