Phstratton

iTrader: (1)

So basically I was installing a Mega Shifter in my 96 camaro and I had to trim the tunnel a little bit. Well, I was focusing on the cutting the metal tunnel and I accidentally cut the harness that runs under the console. Well I pieced everything back together to the best of my ability, but now my gauge lights don't work. I checked the fuse and it's good, so I'm guessing I pieced wires back together wrong. The Interior lights work, the headlights work, and the console lights work. Any idea what I've done wrong? Thanks.

Phstratton

iTrader: (1)

My friend came over and I looked at his 94 camaro's wiring and it's very different. Mine also has a random ground wire that mounts behind where the air bag stuff was that his doesn't.

djjab57

iTrader: (17)

Shbox is your friend in a time like this

http://shbox.com/1/schematics_wiring.html