serges
03-04-2011, 03:01 PM
ok I have a junky 84 cutlass that we put together. With a carburated LQ4, stock bottom end and stock L92 heads. Stock truck cam. and 350 tranny. It runs 11.80's. 1.72 60ft 113 mph
11 Second Club - 11.80s
View Full Version : 11.80s
js2fst
03-05-2011, 10:47 PM
You needed that in the monza. Congrats on the 11's
lemons12
03-05-2011, 10:59 PM
Size converter? That sixty could come down a good bit.
Good times for the setup though.
Good times for the setup though.
serges
03-06-2011, 09:37 AM
the monza is long gone, I gave that away.
4500 converter and worn out slicks for this season I'm thinking about going with a hot cam or a little bigger.
4500 converter and worn out slicks for this season I'm thinking about going with a hot cam or a little bigger.
Fast T
03-06-2011, 01:34 PM
Thats a nice et, you just need to work on your 60ft.
modstang60
03-06-2011, 05:33 PM
Good run man
serges
03-06-2011, 07:57 PM
thanks
BOBS99SS
03-13-2011, 09:29 PM
yeah for your set up those are pretty solid numbers ,good run for sure
logic factory
03-20-2011, 07:21 PM
based on what you have shared i am having a difficult time wrapping my head around this.
can you share all the increments with us? a date the pass was made and at what track. post a time slip? a video? what gears? tires?
can you share all the increments with us? a date the pass was made and at what track. post a time slip? a video? what gears? tires?
Dirty Vegas
03-29-2011, 01:39 PM
the monza is long gone, I gave that away.
4500 converter and worn out slicks for this season I'm thinking about going with a hot cam or a little bigger.
Why oh why would you use that cam? I wouldn't put that in my motor if someone gave it to me for free. If you're going to go through all that work to put a cam in, make it worthwhile since this probably isn't your daily driver.
4500 converter and worn out slicks for this season I'm thinking about going with a hot cam or a little bigger.
Why oh why would you use that cam? I wouldn't put that in my motor if someone gave it to me for free. If you're going to go through all that work to put a cam in, make it worthwhile since this probably isn't your daily driver.