View Full Version : 12.03 @ 119.95


98silvermaro
03-05-2011, 03:34 AM
motor is back together.... so close FML
I just put BBk with 85mm lid, maf, and tb on so waiting to get tune then i should be in the 11's

MasterTomos
03-05-2011, 04:49 AM
People have broken into high 10's at that mph, you should have 11's in the bag soon!

Zmg00camaross
03-05-2011, 04:56 AM
Must be a shitty 60ft but good mph. probly cant launch well with the 10 bolt and m6.

andrewss
03-05-2011, 01:00 PM
motor is back together.... so close FML
I just put BBk with 85mm lid, maf, and tb on so waiting to get tune then i should be in the 11's

What was your 60ft?

CanadianGoat
03-05-2011, 01:24 PM
Yeah Id guess a crappy 60 ft--with that mph--easy in the 11's!! Good job.

98silvermaro
03-05-2011, 01:32 PM
60' 1.926
330 5.233
1/8 7.880
mph 94.41
1000 10.151
1/4 12.037
mph 119.95

im launching about 2500 rpm and riding the clutch and it spins at the top of first.... shift to second and it spins... spins over in 3rd and hooks in 4th
im running on a nitto 555 street tire... all i wanted was a 11.999 or 120 mph lol
oh iron block+system+full tank+my 300lb fat ass = 3900lb cow lol

CanadianGoat
03-05-2011, 06:09 PM
60' 1.926
330 5.233
1/8 7.880
mph 94.41
1000 10.151
1/4 12.037
mph 119.95

im launching about 2500 rpm and riding the clutch and it spins at the top of first.... shift to second and it spins... spins over in 3rd and hooks in 4th
im running on a nitto 555 street tire... all i wanted was a 11.999 or 120 mph lol
oh iron block+system+full tank+my 300lb fat ass = 3900lb cow lol

Well those arent the greatest 60 ft's. Id think you should be in the low 1.60's making an easy mid 11 pass.

98silvermaro
03-05-2011, 06:32 PM
Well those arent the greatest 60 ft's. Id think you should be in the low 1.60's making an easy mid 11 pass.

I want to put some MT ET's on it... but my 10bolt wont like me lol

but when i get a rearend... mid 11's i think would not be hard to get

dug
03-05-2011, 10:07 PM
what rpm does it go through the traps at?

4doortypels
03-06-2011, 12:52 PM
60' 1.926
330 5.233
1/8 7.880
mph 94.41
1000 10.151
1/4 12.037
mph 119.95

im launching about 2500 rpm and riding the clutch and it spins at the top of first.... shift to second and it spins... spins over in 3rd and hooks in 4th
im running on a nitto 555 street tire... all i wanted was a 11.999 or 120 mph lol
oh iron block+system+full tank+my 300lb fat ass = 3900lb cow lol

if he lost some weight hed be high 10s all day

98silvermaro
03-06-2011, 03:20 PM
what rpm does it go through the traps at?

around 6k

modstang60
03-06-2011, 06:33 PM
Congrats on the run

BStowers023
03-06-2011, 06:51 PM
Must be running 4.10s passing at 6K?

98silvermaro
03-06-2011, 08:52 PM
Must be running 4.10s passing at 6K?

you are correct.... I wanna do a 9" with 3.90's with a 150 shot

BStowers023
03-07-2011, 11:20 AM
Yeah that's kindof the same setup I wanna do with mine. It'll give you some more room for mph with the big shot.

Fast T
03-07-2011, 07:43 PM
Congrats on your run,You should be in the 11s real soon;)

98silvermaro
03-10-2011, 01:49 AM
we will find out in a couple of weeks... going to get retuned next week