WTB 243/799 heads, Streetsweeper HT (228/232) cam, Drag bar,Torque arm
03-08-2011, 09:08 AM
#1
WTB 243/799 heads, Streetsweeper HT (228/232) cam, Drag bar,Torque arm Looking for a set of Complete 243's or 799's ported or not must be in good condition, mileage really isn't an issue
also in search of an FTI Streetsweeper HT cam (228/232 .612 .600 111)
May want a Drag bar & Adjustable torque arm as well (spohn/bmr)
include price/pics in response or PM me
also in search of an FTI Streetsweeper HT cam (228/232 .612 .600 111)
May want a Drag bar & Adjustable torque arm as well (spohn/bmr)
include price/pics in response or PM me
Last edited by spicebird98; 03-27-2011 at 01:13 AM.
03-09-2011, 07:18 PM
#4
TECH Fanatic
iTrader: (34)
Join Date: Jun 2004
Location: lancaster,pa
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
i have a set as well. mine have 4,500 miles on them. they have a fresh valve job, bowls opened up, and pac 1518's shimmed to 1.8. might be more than you want to spend though
03-13-2011, 11:20 PM
#7
I got a set of factory clean 243's (cleaned in parts washer) that were removed from an 05 ls2 gto (20,000 miles), so the valves are not the sodium ones, but they are still 243 ls6 heads (also they are the "good" 243 heads with the triangle SPM mark by the spark plug.). I currently have new Comp Cam 918 springs installed. I would like to get $650 shipped depending on location.
I could reinstall factory ls6 springs for $575 shipped.
I was goin to use for a project but my buddy basically gave me a set of satge 2's for nothing...pm if interested
I also have a set of 241 ls1 heads off of an 02 camaro ss with only 11000 miles on them, but again cleaned to factory clean...thanks
I could reinstall factory ls6 springs for $575 shipped.
I was goin to use for a project but my buddy basically gave me a set of satge 2's for nothing...pm if interested
I also have a set of 241 ls1 heads off of an 02 camaro ss with only 11000 miles on them, but again cleaned to factory clean...thanks
