TEA stage II heads, cam & intake on LS2, 475 RWHP

Reply Subscribe

Thread Tools

Search this Thread

03-16-2011, 09:03 AM

jdblack7

Teching In

Thread Starter

Join Date: Feb 2010

Location: Prospect Kentucky

Posts: 15

Likes: 0

Received 0 Likes on 0 Posts

TEA stage II heads, cam & intake on LS2, 475 RWHP

I'm quite pleased with this new set up my `05 C6 LS2 Z51.

Thanks to Mike Schmitt @ TEA for his help, Brian Tooley for helping me pick out the new cam and degreeing the cam too, Jeff Creech on the base tune & Dr. Bryan Carlin for helping wrench and tweaking the WOT tune on the dyno.

Last edited by jdblack7; 03-16-2011 at 09:04 AM. Reason: add info

Reply Like

03-16-2011, 09:58 AM

Intercooler2

11 Second Club

iTrader: (24)

Join Date: Mar 2008

Location: North East, MD

Posts: 2,555

Likes: 0

Received 2 Likes on 2 Posts

LS2 is a 6.0 liter right? I don't see cam spec's but isn't that a little low?

Reply Like

03-16-2011, 10:09 PM

ZO6 Bryan

Staging Lane

Join Date: Aug 2006

Posts: 60

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by Intercooler2

LS2 is a 6.0 liter right? I don't see cam spec's but isn't that a little low?

I think it's pretty damn strong now. See this thread https://ls1tech.com/forums/dynamomet...-425-rwhp.html

Additional 50 hp over the first setup. New cam is 231/239 .617/.624 113 +4

Reply Like

03-17-2011, 09:26 AM

redtan

TECH Junkie

iTrader: (5)

Join Date: May 2008

Location: Belmont, MA

Posts: 3,764

Likes: 0

Received 15 Likes on 14 Posts

For a stock cubed and stock heads LS2 those are pretty strong numbers. Mid to high 400s is the norm for h/c/i, so this is on the higher end of that range with 243s.