soft monster...
03-19-2011, 11:14 PM
#1
Launching!
Thread Starter
Join Date: Nov 2006
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
soft monster... Bought the tick master cylinder,gm slave cylinder, and the monster kit stage 1. Now my question is, it was my understanding that with the tick master cylinder is supposed to "cure" or "fix" the high rpm shifting problem. But today I was shifting near redline and the pedal just stuck to the floor, I let off the gas and it came back up. Would you say I need to adjust it or bleed it? Ideas will greatly be appreciated.
03-20-2011, 10:37 PM
#5
TECH Addict
iTrader: (14)
Join Date: Feb 2007
Location: Owasso, OK
Posts: 2,342
Likes: 0
Received 0 Likes
on
0 Posts
^^^Slave pushes the diaphragm spring in the pressure plate over center and it cant return like it normally would. Once it pops over center, it looses its mechanical advantage.
03-21-2011, 02:24 PM
#6
FormerVendor
iTrader: (1)
Join Date: Jun 2009
Location: DFW, Texas
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
You might have set the Tick master a little too far. Go over the instructions and set it again, or give Tick a call and they will be able to answer any questions about their master.
