Neumonic2002
03-21-2011, 09:14 PM
Had a new cam installed a couple weeks ago (big thanks to my buddy Chad Barton) and finally made it to the dyno i have been using to measure all of my progress from modding my 2006 M6 Z51 C6.
Previous numbers: 399/403
Mods were AR Headers w/cats, Vararam, Fast 102 unported, Ported TB & a tune.
New Numbers: 452/421 - Tuned by DSteck (Thanks Dave)
Parts replaced cam (235/239 .620/.621 112 +4), springs (Comp 26926), Pushrods (Comp Hi-Tech 7.425), 10% UD Pulley (Powerbond), Timing chain (Katech)
The story behind the cam I went with was to have something between max effort and great street manners.
Ron @ Vengeance Racing helped me with the cam and spent a decent amount of time listening to where I'm at and where I want to be when the project is complete.
The additional pieces to the project will be upgrading the MAF, porting the Fast intake and switching out the stock heads for some as cast Trick Flow 220's and bumping the compression to 11.5-11.7
Contemplating some non-adjustable rollers as well.
http://i628.photobucket.com/albums/uu7/Neumonic2006/New%20cam%20Idle%20clip/th_IMG_0113.jpg (http://s628.photobucket.com/albums/uu7/Neumonic2006/New%20cam%20Idle%20clip/?action=view¤t=IMG_0113.mp4)
Cold start idle clip
First pull was with the NPP mufflers closed
http://i628.photobucket.com/albums/uu7/Neumonic2006/3-19-2011%20Dyno%20pulls/3-19-2011Dynopulls001.jpg
John
Previous numbers: 399/403
Mods were AR Headers w/cats, Vararam, Fast 102 unported, Ported TB & a tune.
New Numbers: 452/421 - Tuned by DSteck (Thanks Dave)
Parts replaced cam (235/239 .620/.621 112 +4), springs (Comp 26926), Pushrods (Comp Hi-Tech 7.425), 10% UD Pulley (Powerbond), Timing chain (Katech)
The story behind the cam I went with was to have something between max effort and great street manners.
Ron @ Vengeance Racing helped me with the cam and spent a decent amount of time listening to where I'm at and where I want to be when the project is complete.
The additional pieces to the project will be upgrading the MAF, porting the Fast intake and switching out the stock heads for some as cast Trick Flow 220's and bumping the compression to 11.5-11.7
Contemplating some non-adjustable rollers as well.
http://i628.photobucket.com/albums/uu7/Neumonic2006/New%20cam%20Idle%20clip/th_IMG_0113.jpg (http://s628.photobucket.com/albums/uu7/Neumonic2006/New%20cam%20Idle%20clip/?action=view¤t=IMG_0113.mp4)
Cold start idle clip
First pull was with the NPP mufflers closed
http://i628.photobucket.com/albums/uu7/Neumonic2006/3-19-2011%20Dyno%20pulls/3-19-2011Dynopulls001.jpg
John