oldgoat69

I am in the midst of rebuilding the wiring harness for the GTO and have run into a bit of a quandry. I need to come up with a clean way to activate the TCC lockup control. I looked at retrofitting a late style stoplight switch but it just does not seem practical. What is the most common wat to do this?

aknovaman

iTrader: (7)

Go here and look at page 9

http://www.hotrodlane.cc/Instruction...ingharness.pdf

Or here on page 11

http://www.painlessperformance.com/Manuals/60218.pdf

bjamick

iTrader: (31)

Here is how I did mine.

http://www.jaguarspecialties.com/tech_tips5.asp

TomM

iTrader: (56)

Why not practical, I have done two using a monte carlo switch with cruise, works like a champ.....fused 12v in to BLS, purple wire out to TCC......done.

T,

psiconversion

iTrader: (5)

We offer a switch with a pigtail that will thread into stock location. $17. PM me for details.

oldgoat69

Thanks for the ideas. I have been tryng to out think this whole thing. The plan of using an OEM cruise control stop light switch came to mind early, but I had convinved myself that it would not work. I even have the switch to operate the DBW cruise all set up and ready to go.