Post your hotcam track times
02-19-2004, 04:20 PM
#1
TECH Regular
Thread Starter
Join Date: Nov 2001
Location: Texas
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Post your hotcam track times My clutch is in! I will be going to the track soon and am don't have a clue what to expect from my setup. I have raced on the street but have never made a pass down the strip 
I'm nervous, and excited all at the same time 
I'm nervous, and excited all at the same time Last edited by Steve98Z; 02-23-2004 at 06:25 AM.
02-23-2004, 10:34 AM
#3
back in summer of 2001. Hotcam, SLp longtubes, NO tuning, stock clutch, 3.73 gears in 10 bolt, stock ls1 intake, stock throttle body, no weight reduction, stock shocks/springs
12.60@113.5 on god awful 2.15 sixty foot on 16" nittos.
90 percent humidity, shitty elevation.
never got to run it in cold weather because i would leave for school but it would go like that consistently.
12.60@113.5 on god awful 2.15 sixty foot on 16" nittos.
90 percent humidity, shitty elevation.
never got to run it in cold weather because i would leave for school but it would go like that consistently.
02-23-2004, 01:11 PM
#4
Launching!
Join Date: Apr 2002
Location: Las Vegas, NV
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
I have seen a car with SLP LT's, full boltons, with a Ford 9 with 4.11's pull the whole front end off the ground in 1st and second :-) at the track... I think he went 12.00 at 119 or somehting, yeah the trap speed was friggin high. But then I also saw a STOCK and I mean STOCK including paper air filer and everything WS^ run 12.6 there also. Come to think about it, I think that was and is the fastest non modified LS1 ever.
02-23-2004, 09:17 PM
#5
10 Second Club
iTrader: (1)
Join Date: Nov 2001
Location: Boggy Creek
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
Steve,i might be going back to hallsville in a few weeks on friday night if the weather is good. You better hope you don't snap the 10 bolt if you go because a new clutch,sticky track and a high rpm launch will end your day soon on a stock 10 bolt.
Trending Topics
02-24-2004, 06:10 AM
#8
TECH Regular
Thread Starter
Join Date: Nov 2001
Location: Texas
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StreetStalkerZ
Steve,i might be going back to hallsville in a few weeks on friday night if the weather is good. You better hope you don't snap the 10 bolt if you go because a new clutch,sticky track and a high rpm launch will end your day soon on a stock 10 bolt.
02-24-2004, 05:06 PM
#9
10 Second Club
iTrader: (21)
Join Date: Nov 2001
Location: Olive Branch MS/Memphis
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Here is a slip from a couple weeks ago. This is the first time I have run the car since adding the hotcam. There is a link to a video below. If you look close you can see that right front tire stop spinning on a couple of launches.
Video
