l92 heads -- wcch / lingenfelter / tsp
#1
Banned
Thread Starter
Join Date: Mar 2011
Location: Deland
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
l92 heads -- wcch / lingenfelter / tsp
I am looking for some heads and Im not sure who to go with. Im not to knowlegeable with heads so I guess I will leave it to the masses.
I see than many like wcch and I am leaning that way, but what about the lingenfelter ls3 heads? They flow 350 @ 600 and wcch flows 353.7 is that a big deal when it comes to performance? Plus the lingenfelter heads come with light weight hollow stem intake valves and inconel exhaust valves where as the wcch come with stainless steal I think.
the lingenfelter heads are $1,944.95 shipped and the wcch are $2,089.56 plus shipping. Are the wcch heads worth the extra money?
I also listed tsp because they are coming out with a set of prc cast l92 heads but I dont have info on them yet.
http://www.lingenfelter.com/mm5/merchant.mvc?
I see than many like wcch and I am leaning that way, but what about the lingenfelter ls3 heads? They flow 350 @ 600 and wcch flows 353.7 is that a big deal when it comes to performance? Plus the lingenfelter heads come with light weight hollow stem intake valves and inconel exhaust valves where as the wcch come with stainless steal I think.
the lingenfelter heads are $1,944.95 shipped and the wcch are $2,089.56 plus shipping. Are the wcch heads worth the extra money?
I also listed tsp because they are coming out with a set of prc cast l92 heads but I dont have info on them yet.
http://www.lingenfelter.com/mm5/merchant.mvc?
Last edited by Z500HP; 04-09-2011 at 05:57 PM.
#2
11 Second Club
iTrader: (35)
Join Date: Dec 2004
Location: NW Chicago burbs
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Check out the guys from A.I very friendly and great service -- > http://www.advancedinduction.com/AiProductsGMLS3.html
#6
i have the sdpc heads they cost less 1500 for the set and perform great.here is the link to there website.they are one of the sponsors on ls1tech also.the bottom link is a article from hotrod mag testing a bunch of heads sdpc hold there own
http://sdparts.com/details/scoggin-d...enter/sd8801-1
http://www.hotrod.com/techarticles/e...4_casting.html
http://sdparts.com/details/scoggin-d...enter/sd8801-1
http://www.hotrod.com/techarticles/e...4_casting.html
#7
Banned
Thread Starter
Join Date: Mar 2011
Location: Deland
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
i have the sdpc heads they cost less 1500 for the set and perform great.here is the link to there website.they are one of the sponsors on ls1tech also.the bottom link is a article from hotrod mag testing a bunch of heads sdpc hold there own
http://sdparts.com/details/scoggin-d...enter/sd8801-1
http://www.hotrod.com/techarticles/e...4_casting.html
http://sdparts.com/details/scoggin-d...enter/sd8801-1
http://www.hotrod.com/techarticles/e...4_casting.html
Last edited by Z500HP; 04-11-2011 at 07:31 PM.
Trending Topics
#9
Banned
Thread Starter
Join Date: Mar 2011
Location: Deland
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
i have the sdpc heads they cost less 1500 for the set and perform great.here is the link to there website.they are one of the sponsors on ls1tech also.the bottom link is a article from hotrod mag testing a bunch of heads sdpc hold there own
http://sdparts.com/details/scoggin-d...enter/sd8801-1
http://www.hotrod.com/techarticles/e...4_casting.html
http://sdparts.com/details/scoggin-d...enter/sd8801-1
http://www.hotrod.com/techarticles/e...4_casting.html
#10
#12
All the big name sponsor's heads will make about the same power. That article you read from hot rod, did you notice all the heads (mast excluded) were within 1% power of each other? A dyno's repeatability could easily sway those numbers, so don't take it as the end all be all.
Don't kid yourself if you think "oh gee guys, this one has 4 more cfm according to their website, where's my visa card." It wont buy you anything. I've flowed a set of Gen 1 sbc heads at different benches, they had a 12 cfm spread and they were the same heads bro. So don't even think its apples and apples.
Bottom line is I would go with the sponsor who offers the parts your looking for, at the best price. Call them about pricing, don't just look at their website's.
Don't kid yourself if you think "oh gee guys, this one has 4 more cfm according to their website, where's my visa card." It wont buy you anything. I've flowed a set of Gen 1 sbc heads at different benches, they had a 12 cfm spread and they were the same heads bro. So don't even think its apples and apples.
Bottom line is I would go with the sponsor who offers the parts your looking for, at the best price. Call them about pricing, don't just look at their website's.
#14
Tin Foil Hat Wearin' Fool
iTrader: (36)
Join Date: Oct 2004
Location: Austin, TX
Posts: 23,027
Likes: 0
Received 0 Likes
on
0 Posts
I will say this, Ive been dealing with Richard at WCCH for the better part of decade now and Ill never have another shop build me a set of heads. Top quality products, great prices, and the customer service CANNOT be beat. Great guy, give him a call 818-705-5454 or www.proheads.com