how to fabricate a baffle in valve covers
04-11-2011, 09:42 PM
#1
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: Jonesboro, Arkansas
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
how to fabricate a baffle in valve covers I bought some of the ebay fabricated valve covers. I don't mind drilling holes in them for my pcv system and breather filter. However I need to figure out a way to make or put a baffle under the filter and pcv valve to prevent oil buildup. Has anyone done this or have any tips? Thanks.
Edit sorry I realized I posted this in the wrong section by accident.
Edit sorry I realized I posted this in the wrong section by accident.
Last edited by b_evans06; 04-11-2011 at 09:48 PM.
