New 2006 Imp SS. New member. Whats good?!
04-20-2011, 07:36 PM
#1
Teching In
Thread Starter
Join Date: Apr 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
New 2006 Imp SS. New member. Whats good?! Hey there. Typical new guy 1st post here... Just bought a 2006 Imp SS. 50k. F'n stoked! Runs great (Stock). I have a K&N cai, 2 Flowmaster Super 44's; 3" in/out & a Magnaflow converter in the mail...Running on 93...Anybody have an idea on similarly modded cars track times or hp/tq reads? Im headin to the track soon to test. 
04-20-2011, 07:40 PM
#2
Probably run about 13.9 @ 98?
Just cut the cat off, no need for the magnaflow unit. And swap out the Flowmasters with another muffler and it'll probably pick up some. Other than that, hit up a catless DP, cutout and a tune.
Just cut the cat off, no need for the magnaflow unit. And swap out the Flowmasters with another muffler and it'll probably pick up some. Other than that, hit up a catless DP, cutout and a tune.
Trending Topics
04-20-2011, 09:40 PM
#8
TECH Enthusiast
Join Date: Jul 2010
Location: louisiana
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
welcome to the site!!
expect to run 13.9 to 14.3
i ran 14.3 with bald tires, 87 octane and horrible a horrible launch
just dont floor it from the start and u will be good!
but 13.6 stock has been done!
expect to run 13.9 to 14.3
i ran 14.3 with bald tires, 87 octane and horrible a horrible launch
just dont floor it from the start and u will be good!
but 13.6 stock has been done!
04-20-2011, 10:11 PM
#9
I'm pretty sure 13.9 bone stock is the record...but then again I could have missed something.
04-21-2011, 07:57 AM
#12
On The Tree
Join Date: Apr 2011
Location: Kenosha, WI
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
buy a trans cooler, I just put a bigass one in my car, gotta find a better way to secure it though than just zipties haha, but it works great with no leaks, its only in the low 40's here but after driving for 45 mins about 20 miles, the temp didnt go over 130
04-21-2011, 09:35 AM
#13
Banned
Join Date: Feb 2011
Location: lebanon, mo
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
04-21-2011, 10:21 AM
#14
12 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Renton, WA
Posts: 2,563
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/ls4-perfo...mpilation.html
There was a guy named TonyGXP who with a headlight removed ran a 13.6 stock. This was in a GXP. I'll do some digging.
https://ls1tech.com/forums/ls4-perfo...-102-37-a.html
And I don't know how in the hell supercat ran a 106-107 mph with just rockers and a ported intake. (must have been downhill!)
https://ls1tech.com/forums/ls4-perfo...06-89-mph.html
https://ls1tech.com/forums/ls4-perfo...2s-almost.html 13.07's!
I think Travis needs to update the track times and place himself 2nd. LOL
There was a guy named TonyGXP who with a headlight removed ran a 13.6 stock. This was in a GXP. I'll do some digging.
https://ls1tech.com/forums/ls4-perfo...-102-37-a.html
And I don't know how in the hell supercat ran a 106-107 mph with just rockers and a ported intake. (must have been downhill!)
https://ls1tech.com/forums/ls4-perfo...06-89-mph.html
https://ls1tech.com/forums/ls4-perfo...2s-almost.html 13.07's!
I think Travis needs to update the track times and place himself 2nd. LOL
Last edited by DavidGXP; 04-21-2011 at 11:13 AM.
04-21-2011, 01:22 PM
#15
Teching In
Thread Starter
Join Date: Apr 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/ls4-perfo...mpilation.html
2006 Fully loaded GXP.
Custom cam 218/222@.050" 113L/S .595/.601 lift, DOD delete, Ported LS6 intake, 243 Milled heads=10.25:1 with back cut valves, PAC springs, Hi-Tech 7.450" molly pushrods. DT headers into catless Magnaflow exhaust, Mobile1 5/30w sythetic and a CAI intake. Lew tuned engine and HP tuned transmission with a TransGo shift kit. 275/40/18 Hankook V12 tires, Lowered 2.5" and windows tinted 20%
2006 Fully loaded GXP.
Custom cam 218/222@.050" 113L/S .595/.601 lift, DOD delete, Ported LS6 intake, 243 Milled heads=10.25:1 with back cut valves, PAC springs, Hi-Tech 7.450" molly pushrods. DT headers into catless Magnaflow exhaust, Mobile1 5/30w sythetic and a CAI intake. Lew tuned engine and HP tuned transmission with a TransGo shift kit. 275/40/18 Hankook V12 tires, Lowered 2.5" and windows tinted 20%
......Pics/specs please.
04-21-2011, 02:15 PM
#16
12 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Renton, WA
Posts: 2,563
Likes: 0
Received 0 Likes
on
0 Posts
13.26@105.17 2.05 60ft with a early 5980 shift. I now shift at 6500 and am installing headers so I'm hoping for a lot more. My dashhawh has recorded an improvement of .2 and 2mph more with the 6500 shift. I don't even know what to expect with headers. The cam was a custom grind from EPS and was spec'ed for use with headers. I plan on going back to the track in 2 weeks.
Here is my old tread with a few updates. The first couple of pages I went a little flip floppy.
https://ls1tech.com/forums/ls4-perfo...ads-works.html
Here is my old tread with a few updates. The first couple of pages I went a little flip floppy.
https://ls1tech.com/forums/ls4-perfo...ads-works.html
