Engine is almost done
04-21-2011, 10:35 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Engine is almost done After blowing the engine 2 years ago the final replacement parts are all coming together at once.
LS1 Engine rebuild, ls6 oil pump and ls6 timing chain, new seals and arp bolts throughout- Vengeance R&D
Trickflow 220cc heads milled to my specs for a 232/234 112 cam. (again Vengeance)
Tranny and Clutch (textralia) put in by Vengeace, and motive 3,90 gears.
Clustom Billet Valve Covers and Coil Covers. polished aluminum
Meizer electric water pump
Most likely will talk my wife into getting the ported intake vengence sells and new what looks like a custum cut maf from what lookes a single pince of aluminum.
Have to paint the a/c, steering pump, alternator and anything else that doesn't look like the paint theme doesnt match.
This weekend starts by putting on the long tub headers, starter probably power steering.
LS1 Engine rebuild, ls6 oil pump and ls6 timing chain, new seals and arp bolts throughout- Vengeance R&D
Trickflow 220cc heads milled to my specs for a 232/234 112 cam. (again Vengeance)
Tranny and Clutch (textralia) put in by Vengeace, and motive 3,90 gears.
Clustom Billet Valve Covers and Coil Covers. polished aluminum
Meizer electric water pump
Most likely will talk my wife into getting the ported intake vengence sells and new what looks like a custum cut maf from what lookes a single pince of aluminum.
Have to paint the a/c, steering pump, alternator and anything else that doesn't look like the paint theme doesnt match.
This weekend starts by putting on the long tub headers, starter probably power steering.
