installing new sony HU
04-29-2011, 10:29 PM
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Jan 2006
Location: Ohio
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
installing new sony HU I am installing a new HU. I bought the harness from best buy and looking at all the wires. both the orange wires have no match? did the give me the wrong harness? I haven't done anything yet, so I could take it back. they also didn't give me an adaptor for the ant? that needed as well?
Thanks.
Thanks.
04-30-2011, 07:49 AM
#4
TECH Regular
iTrader: (2)
Join Date: Feb 2006
Location: Kenner, LA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
The orange wires are just your dimmer and illumination. Those are not that important on an install. when i was an installer, most people didnt want that feature anyway. It would dim the lights down at night on the stereo.
05-05-2011, 10:24 PM
#5
yep just do these,,,
ground - blk
red - ign +
yellow - constant +
white
white and blk
green
green and blk
grey
grey and blk
purple
purple and blk
(and if you have a aftermarket amp and sub,,, blue w/white stripe to amp)
(and if you have a power ant. hook up those wires)
dont worry bout anything else
ground - blk
red - ign +
yellow - constant +
white
white and blk
green
green and blk
grey
grey and blk
purple
purple and blk
(and if you have a aftermarket amp and sub,,, blue w/white stripe to amp)
(and if you have a power ant. hook up those wires)
dont worry bout anything else
