Jeep Wrangler YJ with LS376
05-01-2011, 02:14 PM
#1
Registered User
Thread Starter
Join Date: May 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Jeep Wrangler YJ with LS376 Hello everybody,
Iīm working on my project Wrangler. I have already installed the ls376 crate engine and the t56 magnum. For the harnes I have decided to go with the original gmpp controller kit for the ls376.
Now I donīt know the correct wiring for the fuse control center. There are 3 studs available on the fuse control center. The studs are described with A, B and _|_.
Can I wire the battery cable to A and the ground cabel to _|_, or I donīt need the ground cable.
On the attached picture I wired the ground cabel to the box, but I donīt know if itīs right.
I hope, anybody has already wired the fuse control center and can help me.
Thanks
Mike
Iīm working on my project Wrangler. I have already installed the ls376 crate engine and the t56 magnum. For the harnes I have decided to go with the original gmpp controller kit for the ls376.
Now I donīt know the correct wiring for the fuse control center. There are 3 studs available on the fuse control center. The studs are described with A, B and _|_.
Can I wire the battery cable to A and the ground cabel to _|_, or I donīt need the ground cable.
On the attached picture I wired the ground cabel to the box, but I donīt know if itīs right.
I hope, anybody has already wired the fuse control center and can help me.
Thanks
Mike
