WTB or WTT my 94 Z28w/67k for 95-99 GSX
05-06-2011, 01:37 AM
#1
Launching!
Thread Starter
iTrader: (14)
Join Date: Jan 2010
Location: Wheaton, IL
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
WTB or WTT my 94 Z28w/67k for 95-99 GSX Sorry guys, start the flaming. I have to get rid of my Z28. I dont have the room for two cars anymore and am looking for a clean stock (will considered modified) 2g GSX. If it has any engine/trans/t-case rebuilds please include the receipt. It MUST be a 5 speed. The lower the miles the better, I hate to even consider getting rid of my Camaro, but I need a car that gets more than 12mpg and can be driven year round.
Here are the details of my car:
Engine:
-LS1 lid conversion
-A/C removed
-Oil cooler removed
-TB coolant bypass
-TB air foil
-MSD 8.5 superconductor wires
-MSD 6A box
-MSD blaster coil
-NGK tr55 plugs
Suspension:
-LG motorsports adj lower control arms
-Edelbrock adj panhard
-Spohn lower control arm relocation brackets
-Eibach pro kit springs
-Spohn front/rear solid chrome-moly sway bars
Wheels/Tires:
-Chrome ZR-1 wheels 17x9 up front and 17x11 on the back
-Brand new (~500 miles) Nitto 555 275/40/r17 up front and matching Nitto 555R 315/35/17 on the rear w/rolled fenders
-Arp wheel studs on the back
Interior:
-Partial interior swap from 01 SS
-Front seats, leather
-Rear seats, leather
-M6 center console
-Door panels, leather
-Grant GT black leather steering wheel
-20% tint on rear window
-brand new black floor mats
Stereo:
-Pioneer CD player with front aux input
-Infinity 6x9 behind driver and passenger
-Kicker L5 in stealthbox
-Sony 600w amp
Very clean stereo install. You cant see the speaker, amp, or wires in the hatch. It's all under the passenger side plastics.
Exhaust:
-Stainless steel long tube headers (ebay)
-Stainless steel Y pipe (ebay)
-Magnaflow catback (no cat) (also, not installed as of 5/5. I plan on getting it installed soon, it's way too loud)
-3" QTP electric cutout (also not installed yet, hopefully within a week)
Misc:
-New water pump
-New coolant sensor
-LS1 calipers (red)
-Drilled/slotted rotors
-160 thermostat
-New timing cover
-New opti seal
-New wp seal(s)
-New crank seal
-New oil pan gasket
-New oil pressure sensor
-Ragjoint eliminator
-New Sylvania silverstar ultra 9006 bulbs
The bad:
-Still has a verrrry small oil leak. Only one or two drops every few days
-Small amount of rust on driver floor board
-Air bags non functional because of the aftermarket steering wheel
-SES light because of the long tube headers, could be tuned out easily
-Parking brake doesnt work, not sure why still working on that one
-Drivers window has a small amount of scratches on it, alldata says it's a fault with the felt on the window
This is a very fun car, with the suspension modifications it takes the corners very quickly. It has a lot of the basic aftermarket parts on it for a nice base to build a very quick car, or leave it as is and enjoy a reliable ride. Let me know what you guys have to trade. Thanks!
Here are the details of my car:
Engine:
-LS1 lid conversion
-A/C removed
-Oil cooler removed
-TB coolant bypass
-TB air foil
-MSD 8.5 superconductor wires
-MSD 6A box
-MSD blaster coil
-NGK tr55 plugs
Suspension:
-LG motorsports adj lower control arms
-Edelbrock adj panhard
-Spohn lower control arm relocation brackets
-Eibach pro kit springs
-Spohn front/rear solid chrome-moly sway bars
Wheels/Tires:
-Chrome ZR-1 wheels 17x9 up front and 17x11 on the back
-Brand new (~500 miles) Nitto 555 275/40/r17 up front and matching Nitto 555R 315/35/17 on the rear w/rolled fenders
-Arp wheel studs on the back
Interior:
-Partial interior swap from 01 SS
-Front seats, leather
-Rear seats, leather
-M6 center console
-Door panels, leather
-Grant GT black leather steering wheel
-20% tint on rear window
-brand new black floor mats
Stereo:
-Pioneer CD player with front aux input
-Infinity 6x9 behind driver and passenger
-Kicker L5 in stealthbox
-Sony 600w amp
Very clean stereo install. You cant see the speaker, amp, or wires in the hatch. It's all under the passenger side plastics.
Exhaust:
-Stainless steel long tube headers (ebay)
-Stainless steel Y pipe (ebay)
-Magnaflow catback (no cat) (also, not installed as of 5/5. I plan on getting it installed soon, it's way too loud)
-3" QTP electric cutout (also not installed yet, hopefully within a week)
Misc:
-New water pump
-New coolant sensor
-LS1 calipers (red)
-Drilled/slotted rotors
-160 thermostat
-New timing cover
-New opti seal
-New wp seal(s)
-New crank seal
-New oil pan gasket
-New oil pressure sensor
-Ragjoint eliminator
-New Sylvania silverstar ultra 9006 bulbs
The bad:
-Still has a verrrry small oil leak. Only one or two drops every few days
-Small amount of rust on driver floor board
-Air bags non functional because of the aftermarket steering wheel
-SES light because of the long tube headers, could be tuned out easily
-Parking brake doesnt work, not sure why still working on that one
-Drivers window has a small amount of scratches on it, alldata says it's a fault with the felt on the window
This is a very fun car, with the suspension modifications it takes the corners very quickly. It has a lot of the basic aftermarket parts on it for a nice base to build a very quick car, or leave it as is and enjoy a reliable ride. Let me know what you guys have to trade. Thanks!
Last edited by my95LTwon; 05-10-2011 at 12:02 AM.
