Gen 5 Camaro External Bolt-On Tech - LS3 Ported, Polished and Powder coated Throttle Bodies

We have decided to run a month long sale here on our fully ported, polished and powder coated LS3 throttle bodies. We will be running the sale price of $199 if you need to use one of our cores and $189!! if you send in yours to have the work done. Regular price is $269, which is honestly still a good deal and everyone has been happy with the results for that price.

For that price you get everything that can possibly be done to a LS3 throttle body. Unlike other porting companies we fully disassemble the tb down to the bare casting alone. We dont just take the blade out and port what we can. These are fully ported and polished to a mirror shine.

Another thing that this allows us to do is port behind the blade, there is alot of unnecessary material behind the blade that others will leave. We also remove the front half of the throttle shaft for even more flow, that no one else bothers to do. This allows us to offer hands down the best ported tb out there.

We have yet to have a customer do a back to back dyno test, but should have one here shortly as we have a local customer who will be shortly. But comparing them to our ls2/7 results i would say they are at least 10rwhp and probably closer to 15rwhp on a pretty stock bolt on car.

After all this amazing porting is finished up we prep the tb for the powder coat color of your choice. This isnt like paint that can chip or be ruined by typical chemicals that can come in contact with the tb. This is an amazing super durable finish that will look the same way for years and years.

In the past quite often we have been sent tb's that have already been cnc'd, and while there is still a good amount of material to remove that the cnc machines cant we understand that alot of the material has already been removed for us, thus making out job easier. So we will pass some of the savings onto the customer, with offering $50 off of previously ported/ cnc'd throttle bodies depending on how well they were done.

The only additional charges will be as follows...

Custom powders or expensive powders will be extra, chrome is $10 and typical 2 coat metallics will be $10 extra for the clear coat as well.

Shipping is a flat rate $13 shipped via 2 day shipping with tracking

Core charge is $200 and is 100% refunded once your stock core is received.

On to the pictures, most popular colors are shown, gloss black, flat black and chrome. Here is a link to the ls1 sale that has a ton of other color examples.

http://www.ls1tech.com/forums/parts-classifieds/1413003-ported-polished-powder-coated-throttle-body-sale.html


http://i141.photobucket.com/albums/r65/timbo121212/2011-05-13_09-14-36_489.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-13_09-14-25_164.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-13_09-14-01_891.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-13_09-14-11_106.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-13_09-16-03_54.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-13_09-15-17_735.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-01-30_20-46-21_409.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-01-30_20-46-02_326.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-01-30_20-45-53_339.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-01-30_20-45-44_381.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-01-30_20-45-35_917.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-09_10-58-11_712.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-09_10-58-20_85.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-09_10-58-52_443.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-09_11-00-21_792.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-09_10-59-44_172.jpg
http://i141.photobucket.com/albums/r65/timbo121212/2011-05-09_11-00-33_584.jpg

I've got the 1st one of these that they did....first rate job on the powder and porting. You're not going to be disappointed in the looks or performance of the throttle body.

Mine's the glossy black one in the images in the first post.
A couple on car shots:
http://img.photobucket.com/albums/v516/huggerorange73/IMG_6460.jpg
http://img.photobucket.com/albums/v516/huggerorange73/IMG_6459.jpg

I've also got one of the first throttle bodies done by them.
I couldn't be happier with the quality job! Impressive work!

I just installed it last night, and instantly noticed a improvement in power - especially low-end acceleration.
My Camaro is pretty close to stock (only other mods are cold air kit and tune).

Very pleased with the results, and a great value as well!

Here's a picture of the stock throttle body off my car versus the new and much improved one. :)

http://www.ls1tech.com/forums/attachment.php?attachmentid=295511&stc=1&d=1305325802

My car put down 350rwhp on the dyno before this.
I will have after dyno numbers next weekend! :)

Do you have a 2008 Corvette tb that I can trade for my 2010 camaro tb? I need the o8 vette tb as the 2010 camaro tb freaks out with the19201861 ls3 gmpp kit\ecm

Thanks for all the orders, sale price is still active as we are running the same sale on camaro5 for 3 more weeks!!!

And the numbers were?

so its 189.99 if we send our tb, for a full porting on the throttle body..?

sent pm but no reply

Does anyone know how to get in touch with him? I really want to get one of these....

I also need one. Do we need to swap any sensors or just swap the whole tb? Pm me info where to send money.

Got my chrome ported throttle body in today. Just finished installing it along with my chrome K&N typhoon intake. Very simple install. Looks great and really changed the lag in throttle response. If you are contemplating getting one, do it. You wont regret it. Here are a few pics.

Thanks guys, we have 2 in stock ready to choose a color and ship!!

I recommend this TB. It helped with throttle response no doubt! I added it with a tune, long tubes and CAI.

My 2010 SS has really woken up.

Thanks for the replies guys definitely appreciate it. Thanks

Very much agree makes a difference!

Thank you sir, bump it up. Have 2 instock and ready to ship. One flat black and one ready for color of buyers choice. Will sell the flat black one for $10 cheaper as its already coated and ready to go so only $189 plus shipping, thats the cheapest we have ever sold one!!!

Thank you sir, bump it up. Have 2 instock and ready to ship. One flat black and one ready for color of buyers choice. Will sell the flat black one for $10 cheaper as its already coated and ready to go so only $189 plus shipping, thats the cheapest we have ever sold one!!!

I would like to purchase a flat black one. How can I place an order?

Is the bore sized increased?

Thanks.

I like the polish. I bought a Vmax TB and the surface was rough it still had the cutter marks in it. They said it was to help break the air up as it went in side but it sounded like bullshit to me.

The Vmax is OK but if I had to do it over again I wouldn't have bought one. Someone might have better luck with this one, to me port and polish go hand in hand.

Thanks for all the orders, sale price is still active as we are running the same sale on camaro5 for 3 more weeks!!!


Please don't mention that site on here. This is a "No Vomit Zone":barf:

Please don't mention that site on here. This is a "No Vomit Zone":barf:

I'm a hypocrite, I have done it myself. But it made me puke.

Are these still on sale? Your inbox is full for PMs

Any word on these? I notice the OP has not been on since November. I dont see any contact information?

I bought a VMAX and to be honest I wouldn't do it again. The VMAX is ported fine but not polished. I have always ported and polished heads and intakes, if I'm wrong someone say something.

Hi 408
Would you happen to have any TB's left?
Im looking for something around 90, or 92mm, cable driven for my LS3 intake. Also looking for a MAF for that same setup.

Thanks
Jess

Looks good