I finally installed my cutouts.
05-18-2011, 09:39 AM
#1
I finally installed my cutouts. So I finally got around to removing the rear section of my B&B exhaust and had my cutouts welded just before the mufflers. It sounds ridiculous.
http://www.youtube.com/watch?v=TZIDy...layer_embedded
Here's where I mounted the switch.
http://www.youtube.com/watch?v=TZIDy...layer_embedded
Here's where I mounted the switch.
Trending Topics
05-19-2011, 09:22 AM
#17
TECH Regular
Join Date: Oct 2007
Location: Gillette, WY
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
One thing people need to realize, is that Brian's car is a 418 stroker with a nice cam. Your stock LS2 or LS6 ain't gonna sound quite like that. But even stock(ish) motors can benefit from some well-placed cutouts.
05-19-2011, 08:09 PM
#19
Staging Lane
iTrader: (-1)
Join Date: Nov 2008
Location: virginia everything is illegal and cops are assholes
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
thank you always heard the arguement before or after x pipe with b&b. Nice! Also sick place where the switch is sleek....
06-13-2011, 04:17 PM
#20
Can you go a little more in depth as to how you wired that switch? I've got some DMH cutouts that should be arriving at my house tonight and really like that switch location.
Just looking for what wires you tapped into and where you ran the wires. I'm tryin to save some time during the install by eliminating some guess-work.
Thanks
Just looking for what wires you tapped into and where you ran the wires. I'm tryin to save some time during the install by eliminating some guess-work.
Thanks