power difference
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Dec 2003
Location: Dallas, Tx
Posts: 1,718
Likes: 0
Received 0 Likes
on
0 Posts
power difference
i have 2 options:
MACs (no ceramic coating) with a catless y-pipe (the cats were replaced with bullets) with a 3" hooker catback and a cutout. lets assume i leave the cutout open all the time
2nd option is MACs with an x-pipe without mufflers (since the bullets are already in the y-pipe).
so which way should i go, and which way is going to give me the most power? and how much of a power difference would i actually see between the two? thanks.
MACs (no ceramic coating) with a catless y-pipe (the cats were replaced with bullets) with a 3" hooker catback and a cutout. lets assume i leave the cutout open all the time
2nd option is MACs with an x-pipe without mufflers (since the bullets are already in the y-pipe).
so which way should i go, and which way is going to give me the most power? and how much of a power difference would i actually see between the two? thanks.
Last edited by tuffluck; 02-24-2004 at 03:35 PM.