hpjunky98

iTrader: (3)

So I'm getting ready to buy the required parts to mate my ls1 fuel system and injectors with a FAST 102 LSXR for use on the 6.2 I'm building. Could you guys review the 2 parts I have in my cart to make sure I added the correct parts? I posted a link below:

1) http://www.byunspeed.com/product_inf...ducts_id=15375

2) http://www.byunspeed.com/product_inf...oducts_id=5489


Also, do either of these kits come with the spacers needed for the injectors and the o-rings needed with the spacers? I looked on the site, but I'm thinking I may need to get those directly from FAST.

Thanks guys for the help.

-Chris

hpjunky98

iTrader: (3)

TTT

I want to get this order in asap, and I'm not getting any help from the vendor...

Thanks

hpjunky98

iTrader: (3)

Last try for help, then I'll take the dive and post back. Please help if you can.

Thank you

hpjunky98

iTrader: (3)

Last try for help, then I'll take the dive and post back. Please help if you can.

Thank you

rigid

iTrader: (5)

I don't know about the parts you posted. When I did my setup with stock LS1 injectors I got my rails from Nasty Performance. I had to get some larger o-rings for the bottom of the injectors, which I got from Lingenfelter. I'd call Nasty first, he had great customer service and knew just what I needed.

Nasty N8

iTrader: (33)

Thanks we will help get the correct rail and setup.