12 Second Club - Well new parts are they going to equal a better track time

I have a 2001 m6 z/28 car was stock till Last year when i added a lid, hooker catback and 100 shot I had run a best of 12.9@115 with a 2.6 60ft on 18 in street tires full trim. Already This year I added kooks 1 7/8 race style longtubes, tsp ORY,adj. lower control arms and relocation brackets, welded in subframe connectors,slp ud pulley and 4.10's and I am getting it tuned thrusday and will be running a 150 shot and i will have my 26/11.50/15 mickeys mounted up could i dip into the 11's I will still be in full trim except airpump that got deleted when i did the headers.

11's will be no problem as long as your Clutch and your rear end hold up !!!

went today and got a tune done and the car pulls harder now then ever . I never would of thought that just doing changes to the computer would make such a differance. now i just need to get to the track.

Be careful with that ten bolt!!

if it brakes i will get a 9 in. it is not a daily driver it is more of a show and strip car. also i do have the rear girdle on it also i forgot that in the list of new parts

The 10 bolt is definitely gonna break :bang:

Your gonna break that rear. You can def do some good times though...for a few runs or less lol

went to the track last night and pulled a 12.84 @107 with a 2.18 60 I am a little upset this is a full bolt on car and 150 shot WTF? This is on street tires still but i pulled the best 60 i ever have.

Your gonna need to get some slicks. Don't expect A huge improvment without traction. you should be getting at least a 2.1-2.2 60ft stock though. You need to work on you launch. walk it of the line a little better.

went to the track last night and pulled a 12.84 @107 with a 2.18 60 I am a little upset this is a full bolt on car and 150 shot WTF? This is on street tires still but i pulled the best 60 i ever have.

I pulled a 2.1 last night