z28camaross2

iTrader: (1)

so my trans mission mount is in pretty bad shape pic below , i found the stock mount on advanced auto its 70 bucks and thats pretty steep for the possiblilty of it ripping again. even though the car does have 70k miles on it in rough new jersey roads. i have longtubes and poly motor mounts going in, in a few weeks, and dont really want insane vibrations, i could take some slight ones, but this is a DD. would it be ok to run poly MM with rubber trans mount or would it be better to go poly as well? also i think my torque arm bushing is shot as well any input on this?



trans mount from advanced

http://shop.advanceautoparts.com/web...GRPENGPAMS____

JRENIGAR

iTrader: (37)

I have poly mm and regular trans mount and dd mine 100 miles a day with no vibrations. I did have a energy susp red poly bushing on the trans for about 10 miles and it went back to the parts store. Hope that answers your ?....

Mystery Bird

iTrader: (7)

Poly mm and rubber trans mount here too.

01ssreda4

iTrader: (96)

My suggestion would be poly MM, rubber trans, and rubber torque arm mount for a DD car.

z99ls1

iTrader: (12)

Get two 4 dollar ones from rock auto lol

z28camaross2

iTrader: (1)

lol 4 dollar one from rock auto ? im guessing that was a joke lowest i found on there was 40 which is still better than 70 from advanced.

i have been having these clunks lately from my rear end i looked under my car trans mount looks like its in pretty rough shape(way worse than the pic i took before) but idk if its that or something coming from the differential. here is a video i took on the way to work you can hear it best at :30-:35 might have to turn the volume up to hear it http://www.youtube.com/watch?v=F9OFWVruKSw


it happens when when im accelorating then let off the gas it instantly starts the sound. but if i apply the gas again the sound goes away

mikh338

iTrader: (16)

i just installed a poly trans mount and i deff have a lot more vibes now, its not crazy bad but you can deff tell. doing poly motor mounts soon as well. drive the car a few times a week at the most so not that big of a deal

SS SLP2

iTrader: (8)

last rubber mount I bought from o rilley was about 14-15.00 they could not catolog the number for Y2K so we matched up the parts.
Johnny

z28camaross2

iTrader: (1)

yeah guys i replaced my transmission mount last night and it was ripped clean in half that stopped alot of clunking around and feels alot more secure. but the sound that has been really driving me crazy is my cutout hitting the floorboard right where the rear passenger right foot would sit, my cousin felt this when he was sitting there so i put my hand there and i could feel it as well so. im gonna have the pipe cut and moved.

Zombiesoldier

iTrader: (1)

good to hear. mine i think is going bad as well.