Alex2210

hey guys i just got my 01 m6 camaro z28 this car came pretty fixed up, but what im trying to find out what kind of gears i have. when im in 6th going 80 its about 1500 rpms on the door it has GU5 which i know is 323 gears but like i said the previous owner did do some work on it..

ULTIMATEORANGESS

iTrader: (4)

if it came with an m6 you have 3.42s stock.

predatorz28

Sounds like you have the stock 3.42 gears. I have an m6 with 3.73's and I run right around 1750 at 70 mph

Alex2210

that sounds good i was thinking about getting some 4.11's but all these forms about 3.73's vs 4.11's is making me reconsider ..

my bandit

iTrader: (10)

is it a true 6 speed or was it a conversion?

Alex2210

its a true 6 speed

my bandit

iTrader: (10)

3.73s are mostly for autos and 4.11 are m6's

Alex2210

you got 4.11's on ur TA ?

oChristiano

iTrader: (6)

Sounds like you have the stock 3.23's and it was an Auto conversion. @ 80 I'm at like 1700 or so maybe alittle higher.

Alex2210

so your saying my car was probably a conversion... is there a way i can see that for sure
?

my bandit

iTrader: (10)

GU6 is for the 3.42's so check your rpo sticker for any of these and it will tell you what came with the car
MD8 THM 700 R4 auto tranny
MM5 Transmission, 5-Speed Manual (Merchandising Option)
MM6 Transmission, Manual, 6-Speed, Borg Warner, 65mm, 2.66 1st, 0.50 6th, O/D
MN6 Transmission - 6-Speed Manual (merchandising Option)
MXO Transmission - Automatic O/D (Merchandising Option)
M30 Transmission - Automatic, 4-Speed, 4LE, Electronic
M49 Transmission, Manual, 5-Speed, Borg Warner, 77mm, 3.75 1st, 0.76 5th, O/D

oChristiano

iTrader: (6)

compnine decoder. You have Gu5 though which is performance gear for a auto. Gu4 is 2.73's and ALL factory 6spd cars came with Gu6 which is 3.42's.

Alex2210

man its MX0 and M30 damn i guess it was an auto my dreams are crashed , thanks guys! lol anyways im still looking for a rear end .. what gears do ya'll think are good (if yall mind educating this noob)

my bandit

iTrader: (10)

for a 6 speed either the 3.42s or 4.11's but make sure you dont destroy your 10 bolt

Alex2210

i was looking at the 12 bolt or the 9' moser rear end from texas speed

my bandit

iTrader: (10)

alot of people have trouble with the 12 bolt becuase of the torque arm and it starts to make noise. i would go with the 9"

Alex2210

does the 01 m6 come with the 10 bolt too?

Pseudonym

iTrader: (3)

^yes it does.

I went with a 12 bolt moser, 3.73s. Mine doesnt make noise, but alot of people complain about theirs whining.

Alex2210

how bad is the whining.. i wouldnt mind as long at it doesnt break on me .. and how are those 3.73's

my bandit

iTrader: (10)

also s this going to be your dd? with 4.10's your mpgs might drop significantly. right now your probably getting over 26